[Intel-wired-lan] [PATCH next-queue v1 2/5] igc: Integrate flex filter into ethtool ops
Nguyen, Anthony L
anthony.l.nguyen at intel.com
Tue Jun 22 21:39:44 UTC 2021
On Thu, 2021-06-10 at 17:39 -0700, Vinicius Costa Gomes wrote:
> From: Kurt Kanzenbach <kurt at linutronix.de>
>
> Use the flex filter mechanism to extend the current ethtool filter
> operations by intercoperating the user data. This allows to match
> eight more bytes within a Ethernet frame in addition to macs, ether
> types and vlan.
>
> The matching pattern looks like this:
>
> * dest_mac [6]
> * src_mac [6]
> * tpid [2]
> * vlan tci [2]
> * ether type [2]
> * user data [8]
>
> This can be used to match Profinet traffic classes by FrameID range.
>
> Signed-off-by: Kurt Kanzenbach <kurt at linutronix.de>
> Reviewed-by: Sebastian Andrzej Siewior <bigeasy at linutronix.de>
> ---
I was preparing these patches for a pull request and came across a
couple warnings. Could you address them before I send these on?
<snip>
> @@ -1215,6 +1221,20 @@ static void igc_ethtool_init_nfc_rule(struct
> igc_nfc_rule *rule,
> ether_addr_copy(rule->filter.dst_addr,
> fsp->h_u.ether_spec.h_dest);
> }
> +
> + /* Check for user defined data */
> + if ((fsp->flow_type & FLOW_EXT) &&
> + (fsp->h_ext.data[0] || fsp->h_ext.data[1])) {
> + rule->filter.match_flags |= IGC_FILTER_FLAG_USER_DATA;
> + memcpy(rule->filter.user_data, fsp->h_ext.data,
> sizeof(fsp->h_ext.data));
> + memcpy(rule->filter.user_mask, fsp->m_ext.data,
> sizeof(fsp->m_ext.data));
> +
> + /* VLAN etype matching is only valid using flex filter
> */
> + if ((fsp->flow_type & FLOW_EXT) && fsp-
> >h_ext.vlan_etype) {
> + rule->filter.vlan_etype = fsp-
> >h_ext.vlan_etype;
> + rule->filter.match_flags |=
> IGC_FILTER_FLAG_VLAN_ETYPE;
drivers/net/ethernet/intel/igc/igc_ethtool.c:1234:49: warning:
incorrect type in assignment (different base types)
drivers/net/ethernet/intel/igc/igc_ethtool.c:1234:49: expected
unsigned short [usertype] vlan_etype
drivers/net/ethernet/intel/igc/igc_ethtool.c:1234:49: got restricted
__be16 const [usertype] vlan_etype
<snip>
> +static int igc_add_flex_filter(struct igc_adapter *adapter,
> + struct igc_nfc_rule *rule)
> +{
> + struct igc_flex_filter flex = { };
> + struct igc_nfc_filter *filter = &rule->filter;
> + unsigned int eth_offset, user_offset;
> + int ret, index;
> + bool vlan;
> +
> + index = igc_find_avail_flex_filter_slot(adapter);
> + if (index < 0)
> + return -ENOSPC;
> +
> + /* Construct the flex filter:
> + * -> dest_mac [6]
> + * -> src_mac [6]
> + * -> tpid [2]
> + * -> vlan tci [2]
> + * -> ether type [2]
> + * -> user data [8]
> + * -> = 26 bytes => 32 length
> + */
> + flex.index = index;
> + flex.length = 32;
> + flex.rx_queue = rule->action;
> +
> + vlan = rule->filter.vlan_tci || rule->filter.vlan_etype;
> + eth_offset = vlan ? 16 : 12;
> + user_offset = vlan ? 18 : 14;
> +
> + /* Add destination MAC */
> + if (rule->filter.match_flags & IGC_FILTER_FLAG_DST_MAC_ADDR)
> + igc_flex_filter_add_field(&flex, &filter->dst_addr, 0,
> + ETH_ALEN, NULL);
> +
> + /* Add source MAC */
> + if (rule->filter.match_flags & IGC_FILTER_FLAG_SRC_MAC_ADDR)
> + igc_flex_filter_add_field(&flex, &filter->src_addr, 6,
> + ETH_ALEN, NULL);
> +
> + /* Add VLAN etype */
> + if (rule->filter.match_flags & IGC_FILTER_FLAG_VLAN_ETYPE)
> + igc_flex_filter_add_field(&flex, &filter->vlan_etype,
> 12,
> + sizeof(filter->vlan_etype),
> + NULL);
> +
> + /* Add VLAN TCI */
> + if (rule->filter.match_flags & IGC_FILTER_FLAG_VLAN_TCI)
> + igc_flex_filter_add_field(&flex, &filter->vlan_tci, 14,
> + sizeof(filter->vlan_tci),
> NULL);
> +
> + /* Add Ether type */
> + if (rule->filter.match_flags & IGC_FILTER_FLAG_ETHER_TYPE) {
> + u16 etype = cpu_to_be16(filter->etype);
drivers/net/ethernet/intel/igc/igc_main.c:3332:29: warning: incorrect
type in initializer (different base types)
drivers/net/ethernet/intel/igc/igc_main.c:3332:29: expected unsigned
short [usertype] etype
drivers/net/ethernet/intel/igc/igc_main.c:3332:29: got restricted
__be16 [usertype]
> + igc_flex_filter_add_field(&flex, &etype, eth_offset,
> + sizeof(etype), NULL);
> + }
>
More information about the Intel-wired-lan
mailing list