[Intel-wired-lan] [PATCH next-queue v3 1/3] igc: Use default cycle 'start' and 'end' values for queues
dvorax.fuxbrumer at linux.intel.com
Wed Aug 18 21:09:09 UTC 2021
On 8/9/2021 17:53, aravindhan.gunasekaran at intel.com wrote:
> From: Vinicius Costa Gomes <vinicius.gomes at intel.com>
> Sets default values for each queue cycle start and cycle end.
> This allows some simplification in the handling of these
> configurations as most TSN features in i225 require a cycle
> to be configured.
> In i225, cycle start and end time is required to be programmed
> for CBS to work properly.
> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes at intel.com>
> Signed-off-by: Aravindhan Gunasekaran <aravindhan.gunasekaran at intel.com>
> Signed-off-by: Mallikarjuna Chilakala <mallikarjuna.chilakala at intel.com>
> drivers/net/ethernet/intel/igc/igc_main.c | 37 ++++++++++++++++++-------------
> drivers/net/ethernet/intel/igc/igc_tsn.c | 6 -----
> 2 files changed, 21 insertions(+), 22 deletions(-)
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer at linux.intel.com>
More information about the Intel-wired-lan