[Intel-wired-lan] [PATCH v2] PCI: Fix Intel i210 by avoiding overlapping of BARs

Michael Walle michael at walle.cc
Fri Aug 20 15:12:01 UTC 2021


Am 2021-03-15 22:51, schrieb Michael Walle:
> Am 2021-02-01 23:20, schrieb Bjorn Helgaas:
>> On Mon, Feb 01, 2021 at 08:49:16PM +0100, Michael Walle wrote:
>>> Am 2021-01-17 20:27, schrieb Michael Walle:
>>> > Am 2021-01-16 00:57, schrieb Bjorn Helgaas:
>>> > > On Wed, Jan 13, 2021 at 12:32:32AM +0100, Michael Walle wrote:
>>> > > > Am 2021-01-12 23:58, schrieb Bjorn Helgaas:
>>> > > > > On Sat, Jan 09, 2021 at 07:31:46PM +0100, Michael Walle wrote:
>>> > > > > > Am 2021-01-08 22:20, schrieb Bjorn Helgaas:
>>> > >
>>> > > > > > > 3) If the Intel i210 is defective in how it handles an Expansion ROM
>>> > > > > > > that overlaps another BAR, a quirk might be the right fix. But my
>>> > > > > > > guess is the device is working correctly per spec and there's
>>> > > > > > > something wrong in how firmware/Linux is assigning things.  That would
>>> > > > > > > mean we need a more generic fix that's not a quirk and not tied to the
>>> > > > > > > Intel i210.
>>> > > > > >
>>> > > > > > Agreed, but as you already stated (and I've also found that in
>>> > > > > > the PCI spec) the Expansion ROM address decoder can be shared by
>>> > > > > > the other BARs and it shouldn't matter as long as the ExpROM BAR
>>> > > > > > is disabled, which is the case here.
>>> > > > >
>>> > > > > My point is just that if this could theoretically affect devices
>>> > > > > other than the i210, the fix should not be an i210-specific quirk.
>>> > > > > I'll assume this is a general problem and wait for a generic PCI
>>> > > > > core solution unless it's i210-specific.
>>> > > >
>>> > > > I guess the culprit here is that linux skips the programming of the
>>> > > > BAR because of some broken Matrox card. That should have been a
>>> > > > quirk instead, right? But I don't know if we want to change that, do
>>> > > > we? How many other cards depend on that?
>>> > >
>>> > > Oh, right.  There's definitely some complicated history there that
>>> > > makes me a little scared to change things.  But it's also unfortunate
>>> > > if we have to pile quirks on top of quirks.
>>> > >
>>> > > > And still, how do we find out that the i210 is behaving correctly?
>>> > > > In my opinion it is clearly not. You can change the ExpROM BAR value
>>> > > > during runtime and it will start working (while keeping it
>>> > > > disabled).  Am I missing something here?
>>> > >
>>> > > I agree; if the ROM BAR is disabled, I don't think it should matter at
>>> > > all what it contains, so this does look like an i210 defect.
>>> > >
>>> > > Would you mind trying the patch below?  It should update the ROM BAR
>>> > > value even when it is disabled.  With the current pci_enable_rom()
>>> > > code that doesn't rely on the value read from the BAR, I *think* this
>>> > > should be safe even on the Matrox and similar devices.
>>> >
>>> > Your patch will fix my issue:
>>> >
>>> > Tested-by: Michael Walle <michael at walle.cc>
>>> 
>>> any news on this?
>> 
>> Thanks for the reminder.  I was thinking this morning that I need to
>> get back to this.  I'm trying to convince myself that doing this
>> wouldn't break the problem fixed by 755528c860b0 ("Ignore disabled ROM
>> resources at setup").  So far I haven't quite succeeded.
> 
> ping #2 ;)

ping #3, soon we can celebrate our first one year anniversary :p

-michael


More information about the Intel-wired-lan mailing list