[Intel-wired-lan] [next-queue v4 04/13] ice: restart periodic outputs around time changes
Tony Nguyen
anthony.l.nguyen at intel.com
Tue Aug 24 00:01:49 UTC 2021
From: Jacob Keller <jacob.e.keller at intel.com>
Wen we enabled auxiliary input/output support for the E810 device, we
forgot to add logic to restart the output when we change time. This is
important as the periodic output will be incorrect after a time change
otherwise.
This unfortunately includes the adjust time function, even though it
uses an atomic hardware interface. The atomic adjustment can still cause
the pin output to stall permanently, so we need to stop and restart it.
Introduce wrapper functions to temporarily disable and then re-enable
the clock outputs.
Fixes: 172db5f91d5f ("ice: add support for auxiliary input/output pins")
Signed-off-by: Jacob Keller <jacob.e.keller at intel.com>
---
drivers/net/ethernet/intel/ice/ice_ptp.c | 49 ++++++++++++++++++++++++
1 file changed, 49 insertions(+)
diff --git a/drivers/net/ethernet/intel/ice/ice_ptp.c b/drivers/net/ethernet/intel/ice/ice_ptp.c
index ae0980f14c80..05cc5870e4ef 100644
--- a/drivers/net/ethernet/intel/ice/ice_ptp.c
+++ b/drivers/net/ethernet/intel/ice/ice_ptp.c
@@ -688,6 +688,41 @@ static int ice_ptp_cfg_clkout(struct ice_pf *pf, unsigned int chan,
return -EFAULT;
}
+/**
+ * ice_ptp_disable_all_clkout - Disable all currently configured outputs
+ * @pf: pointer to the PF structure
+ *
+ * Disable all currently configured clock outputs. This is necessary before
+ * certain changes to the PTP hardware clock. Use ice_ptp_enable_all_clkout to
+ * re-enable the clocks again.
+ */
+static void ice_ptp_disable_all_clkout(struct ice_pf *pf)
+{
+ uint i;
+
+ for (i = 0; i < pf->ptp.info.n_per_out; i++)
+ if (pf->ptp.perout_channels[i].ena)
+ ice_ptp_cfg_clkout(pf, i, NULL, false);
+}
+
+/**
+ * ice_ptp_enable_all_clkout - Enable all configured periodic clock outputs
+ * @pf: pointer to the PF structure
+ *
+ * Enable all currently configured clock outputs. Use this after
+ * ice_ptp_disable_all_clkout to reconfigure the output signals according to
+ * their configuration.
+ */
+static void ice_ptp_enable_all_clkout(struct ice_pf *pf)
+{
+ uint i;
+
+ for (i = 0; i < pf->ptp.info.n_per_out; i++)
+ if (pf->ptp.perout_channels[i].ena)
+ ice_ptp_cfg_clkout(pf, i, &pf->ptp.perout_channels[i],
+ false);
+}
+
/**
* ice_ptp_gpio_enable_e810 - Enable/disable ancillary features of PHC
* @info: the driver's PTP info structure
@@ -783,12 +818,17 @@ ice_ptp_settime64(struct ptp_clock_info *info, const struct timespec64 *ts)
goto exit;
}
+ /* Disable periodic outputs */
+ ice_ptp_disable_all_clkout(pf);
+
err = ice_ptp_write_init(pf, &ts64);
ice_ptp_unlock(hw);
if (!err)
ice_ptp_update_cached_phctime(pf);
+ /* Reenable periodic outputs */
+ ice_ptp_enable_all_clkout(pf);
exit:
if (err) {
dev_err(ice_pf_to_dev(pf), "PTP failed to set time %d\n", err);
@@ -842,8 +882,14 @@ static int ice_ptp_adjtime(struct ptp_clock_info *info, s64 delta)
return -EBUSY;
}
+ /* Disable periodic outputs */
+ ice_ptp_disable_all_clkout(pf);
+
err = ice_ptp_write_adj(pf, delta);
+ /* Reenable periodic outputs */
+ ice_ptp_enable_all_clkout(pf);
+
ice_ptp_unlock(hw);
if (err) {
@@ -1543,6 +1589,9 @@ void ice_ptp_release(struct ice_pf *pf)
if (!pf->ptp.clock)
return;
+ /* Disable periodic outputs */
+ ice_ptp_disable_all_clkout(pf);
+
ice_clear_ptp_clock_index(pf);
ptp_clock_unregister(pf->ptp.clock);
pf->ptp.clock = NULL;
--
2.26.2
More information about the Intel-wired-lan
mailing list