[Intel-wired-lan] [PATCH net-next 4/6] rtnetlink: Add support for SyncE recovered clock configuration
Machnikowski, Maciej
maciej.machnikowski at intel.com
Mon Nov 8 09:03:58 UTC 2021
> -----Original Message-----
> From: Ido Schimmel <idosch at idosch.org>
> Sent: Sunday, November 7, 2021 3:21 PM
> To: Machnikowski, Maciej <maciej.machnikowski at intel.com>
> Subject: Re: [PATCH net-next 4/6] rtnetlink: Add support for SyncE recovered
> clock configuration
>
> On Fri, Nov 05, 2021 at 12:17:19PM +0000, Machnikowski, Maciej wrote:
> >
> >
> > > -----Original Message-----
> > > From: Roopa Prabhu <roopa at nvidia.com>
> > > Sent: Thursday, November 4, 2021 7:25 PM
> > > To: Machnikowski, Maciej <maciej.machnikowski at intel.com>;
> > > netdev at vger.kernel.org; intel-wired-lan at lists.osuosl.org
> > > Cc: richardcochran at gmail.com; abyagowi at fb.com; Nguyen, Anthony L
> > > <anthony.l.nguyen at intel.com>; davem at davemloft.net;
> kuba at kernel.org;
> > > linux-kselftest at vger.kernel.org; idosch at idosch.org; mkubecek at suse.cz;
> > > saeed at kernel.org; michael.chan at broadcom.com
> > > Subject: Re: [PATCH net-next 4/6] rtnetlink: Add support for SyncE
> recovered
> > > clock configuration
> > >
> > >
> > > On 11/4/21 1:12 AM, Maciej Machnikowski wrote:
> > > > Add support for RTNL messages for reading/configuring SyncE
> recovered
> > > > clocks.
> > > > The messages are:
> > > > RTM_GETRCLKRANGE: Reads the allowed pin index range for the
> > > recovered
> > > > clock outputs. This can be aligned to PHY outputs or
> > > > to EEC inputs, whichever is better for a given
> > > > application
> > > >
> > > > RTM_GETRCLKSTATE: Read the state of recovered pins that output
> > > recovered
> > > > clock from a given port. The message will contain the
> > > > number of assigned clocks (IFLA_RCLK_STATE_COUNT) and
> > > > a N pin inexes in IFLA_RCLK_STATE_OUT_IDX
> > > >
> > > > RTM_SETRCLKSTATE: Sets the redirection of the recovered clock for
> > > > a given pin
> > > >
> > > > Signed-off-by: Maciej Machnikowski
> <maciej.machnikowski at intel.com>
> > > > ---
> > >
> > >
> > > Can't we just use a single RTM msg with nested attributes ?
> > >
> > > With separate RTM msgtype for each syncE attribute we will end up
> > > bloating the RTM msg namespace.
> > >
> > > (these api's could also be in ethtool given its directly querying the
> > > drivers)
> >
> > I'm not a fan of merging those messages. The mergeable ones are
> > GETRCLKRANGE and GETCLKSTATE, but the get range function may be
> > result in a significantly longer call if the information about the underlying
> > HW require any HW calls.
> > They are currently grouped in 3 categories:
> > - reading the boundaries in GetRclkRange (we can later add more to it, like
> > configurable frequency limits)
> > - Reading current configuration
> > - setting the required configuration
> >
> > I don't plan adding any additional RTM msg types for those (and that's
> > the reason why I pulled them before EEC state which may have more
> > messages in the future)
> >
> > We also discussed ethtool way in the past RFCs, but this concept
> > is applicable to any transport layer so I'd rather not limit it to ethernet
> > devices (i.e. SONET, infiniband and others).
>
> I'm still not convinced that this doesn't belong in ethtool. I find it
> very weird to have a message called "Get Ethernet Equipment Clock State"
> in rtnetlink and not in ethtool. I also believe it was a mistake to add
> DCB to rtnetlink (for example, why PAUSE is configured via ethtool, but
> PFC via rtnetlink?)
We can use:
- SEC - Synchronous Equipment Clock
- EC - Equipment Clock
SyncE is a specific implementation of a more generic concept. I'd rather not limit
it to Ethernet only, as there are more network types that already use this concept,
like Sonet/SDH or PDH as well as GPON/EPON networks and given the recent
growth in timing applications - I expect more to follow.
More information about the Intel-wired-lan
mailing list