[Intel-wired-lan] [PATCH net-next 8/9] ixgbe: switch to napi_build_skb()

[Alexander Lobakin]

napi_build_skb() reuses per-cpu NAPI skbuff_head cache in order
to save some cycles on freeing/allocating skbuff_heads on every
new Rx or completed Tx.
ixgbe driver runs Tx completion polling cycle right before the Rx
one and uses napi_consume_skb() to feed the cache with skbuff_heads
of completed entries, so it's never empty and always warm at that
moment. Switch to the napi_build_skb() to relax mm pressure on
heavy Rx.

Signed-off-by: Alexander Lobakin <alexandr.lobakin at intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski at linux.intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 0f9f022260d7..80d2d10fd465 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -2170,7 +2170,7 @@ static struct sk_buff *ixgbe_build_skb(struct ixgbe_ring *rx_ring,
 	net_prefetch(xdp->data_meta);

 	/* build an skb to around the page buffer */
-	skb = build_skb(xdp->data_hard_start, truesize);
+	skb = napi_build_skb(xdp->data_hard_start, truesize);
 	if (unlikely(!skb))
 		return NULL;

--
2.33.1