[Intel-wired-lan] [net-next v2 1/2] devlink: add dry run attribute to flash update

Jiri Pirko jiri at resnulli.us
Fri Jul 22 06:26:09 UTC 2022


Thu, Jul 21, 2022 at 11:14:46PM CEST, jacob.e.keller at intel.com wrote:
>Users use the devlink flash interface to request a device driver program or
>update the device flash chip. In some cases, a user (or script) may want to
>verify that a given flash update command is supported without actually
>committing to immediately updating the device. For example, a system
>administrator may want to validate that a particular flash binary image
>will be accepted by the device, or simply validate a command before finally
>committing to it.
>
>The current flash update interface lacks a method to support such a dry
>run. Add a new DEVLINK_ATTR_DRY_RUN attribute which shall be used by a
>devlink command to indicate that a request is a dry run which should not
>perform device configuration. Instead, the command should report whether
>the command or configuration request is valid.
>
>While we can validate the initial arguments of the devlink command, a
>proper dry run must be processed by the device driver. This is required
>because only the driver can perform validation of the flash binary file.
>
>Add a new dry_run parameter to the devlink_flash_update_params struct,
>along with the associated bit to indicate if a driver supports verifying a
>dry run.
>
>We always check the dry run attribute last in order to allow as much
>verification of other parameters as possible. For example, even if a driver
>does not support the dry_run option, we can still validate the other
>optional parameters such as the overwrite_mask and per-component update
>name.
>
>Document that userspace should take care when issuing a dry run to older
>kernels, as the flash update command is not strictly verified. Thus,
>unknown attributes will be ignored and this could cause a request for a dry
>run to perform an actual update. We can't fix old kernels to verify unknown
>attributes, but userspace can check the maximum attribute and reject the
>dry run request if it is not supported by the kernel.
>
>Signed-off-by: Jacob Keller <jacob.e.keller at intel.com>
>---
>
>Changes since v1:
>* Add kernel doc comments to devlink_flash_update_params
>* Reduce indentation by using nla_get_flag
>
> .../networking/devlink/devlink-flash.rst      | 23 +++++++++++++++++++
> include/net/devlink.h                         |  4 ++++
> include/uapi/linux/devlink.h                  |  8 +++++++
> net/core/devlink.c                            | 17 +++++++++++++-
> 4 files changed, 51 insertions(+), 1 deletion(-)
>
>diff --git a/Documentation/networking/devlink/devlink-flash.rst b/Documentation/networking/devlink/devlink-flash.rst
>index 603e732f00cc..1dc373229a54 100644
>--- a/Documentation/networking/devlink/devlink-flash.rst
>+++ b/Documentation/networking/devlink/devlink-flash.rst
>@@ -44,6 +44,29 @@ preserved across the update. A device may not support every combination and
> the driver for such a device must reject any combination which cannot be
> faithfully implemented.
> 
>+Dry run
>+=======
>+
>+Users can request a "dry run" of a flash update by adding the
>+``DEVLINK_ATTR_DRY_RUN`` attribute to the ``DEVLINK_CMD_FLASH_UPDATE``
>+command. If the attribute is present, the kernel will only verify that the
>+provided command is valid. During a dry run, an update is not performed.
>+
>+If supported by the driver, the flash image contents are also validated and
>+the driver may indicate whether the file is a valid flash image for the
>+device.
>+
>+.. code:: shell
>+
>+   $ devlink dev flash pci/0000:af:00.0 file image.bin dry-run
>+   Validating flash binary
>+
>+Note that user space should take care when adding this attribute. Older
>+kernels which do not recognize the attribute may accept the command with an
>+unknown attribute. This could lead to a request for a dry run which performs
>+an unexpected update. To avoid this, user space should check the policy dump
>+and verify that the attribute is recognized before adding it to the command.
>+
> Firmware Loading
> ================
> 
>diff --git a/include/net/devlink.h b/include/net/devlink.h
>index 780744b550b8..47b86ccb85b0 100644
>--- a/include/net/devlink.h
>+++ b/include/net/devlink.h
>@@ -613,6 +613,8 @@ enum devlink_param_generic_id {
>  * struct devlink_flash_update_params - Flash Update parameters
>  * @fw: pointer to the firmware data to update from
>  * @component: the flash component to update
>+ * @overwrite_mask: what sections of flash can be overwritten

Well, strictly speaking, this is not related to this patch and should be
done in a separate one. But hey, it's a comment, so I guess noone really
cares.


>+ * @dry_run: if true, do not actually update the flash
>  *
>  * With the exception of fw, drivers must opt-in to parameters by
>  * setting the appropriate bit in the supported_flash_update_params field in
>@@ -622,10 +624,12 @@ struct devlink_flash_update_params {
> 	const struct firmware *fw;
> 	const char *component;
> 	u32 overwrite_mask;
>+	bool dry_run;
> };
> 
> #define DEVLINK_SUPPORT_FLASH_UPDATE_COMPONENT		BIT(0)
> #define DEVLINK_SUPPORT_FLASH_UPDATE_OVERWRITE_MASK	BIT(1)
>+#define DEVLINK_SUPPORT_FLASH_UPDATE_DRY_RUN		BIT(2)
> 
> struct devlink_region;
> struct devlink_info_req;
>diff --git a/include/uapi/linux/devlink.h b/include/uapi/linux/devlink.h
>index b3d40a5d72ff..e24a5a808a12 100644
>--- a/include/uapi/linux/devlink.h
>+++ b/include/uapi/linux/devlink.h
>@@ -576,6 +576,14 @@ enum devlink_attr {
> 	DEVLINK_ATTR_LINECARD_TYPE,		/* string */
> 	DEVLINK_ATTR_LINECARD_SUPPORTED_TYPES,	/* nested */
> 
>+	/* Before adding this attribute to a command, user space should check
>+	 * the policy dump and verify the kernel recognizes the attribute.
>+	 * Otherwise older kernels which do not recognize the attribute may
>+	 * silently accept the unknown attribute while not actually performing
>+	 * a dry run.
>+	 */
>+	DEVLINK_ATTR_DRY_RUN,			/* flag */
>+
> 	/* add new attributes above here, update the policy in devlink.c */
> 
> 	__DEVLINK_ATTR_MAX,
>diff --git a/net/core/devlink.c b/net/core/devlink.c
>index 98d79feeb3dc..1cff636c9b2b 100644
>--- a/net/core/devlink.c
>+++ b/net/core/devlink.c
>@@ -4743,7 +4743,8 @@ EXPORT_SYMBOL_GPL(devlink_flash_update_timeout_notify);
> static int devlink_nl_cmd_flash_update(struct sk_buff *skb,
> 				       struct genl_info *info)
> {
>-	struct nlattr *nla_component, *nla_overwrite_mask, *nla_file_name;
>+	struct nlattr *nla_component, *nla_overwrite_mask, *nla_file_name,
>+		      *nla_dry_run;
> 	struct devlink_flash_update_params params = {};
> 	struct devlink *devlink = info->user_ptr[0];
> 	const char *file_name;
>@@ -4789,6 +4790,19 @@ static int devlink_nl_cmd_flash_update(struct sk_buff *skb,
> 		return ret;
> 	}
> 
>+	/* Always check dry run last, in order to allow verification of other
>+	 * parameter support even if the particular driver does not yet
>+	 * support a full dry-run
>+	 */
>+	params.dry_run = nla_get_flag(info->attrs[DEVLINK_ATTR_DRY_RUN]);
>+	if (params.dry_run &&
>+	    !(supported_params & DEVLINK_SUPPORT_FLASH_UPDATE_DRY_RUN)) {
>+		NL_SET_ERR_MSG_ATTR(info->extack, nla_dry_run,
>+				    "flash update is supported, but dry run is not supported for this device");
>+		release_firmware(params.fw);
>+		return -EOPNOTSUPP;
>+	}
>+
> 	devlink_flash_update_begin_notify(devlink);
> 	ret = devlink->ops->flash_update(devlink, &params, info->extack);
> 	devlink_flash_update_end_notify(devlink);
>@@ -9004,6 +9018,7 @@ static const struct nla_policy devlink_nl_policy[DEVLINK_ATTR_MAX + 1] = {
> 	[DEVLINK_ATTR_RATE_PARENT_NODE_NAME] = { .type = NLA_NUL_STRING },
> 	[DEVLINK_ATTR_LINECARD_INDEX] = { .type = NLA_U32 },
> 	[DEVLINK_ATTR_LINECARD_TYPE] = { .type = NLA_NUL_STRING },
>+	[DEVLINK_ATTR_DRY_RUN] = { .type = NLA_FLAG },
> };
> 
> static const struct genl_small_ops devlink_nl_ops[] = {
>-- 
>2.35.1.456.ga9c7032d4631
>

Reviewed-by: Jiri Pirko <jiri at nvidia.com>




More information about the Intel-wired-lan mailing list