[Intel-wired-lan] [PATCH net-next v2] drivers/net/ethernet: check return value of e1e_rphy()
Li Zhong
floridsleeves at gmail.com
Fri Aug 26 06:56:27 UTC 2022
e1e_rphy() could return error value, which needs to be checked and
reported for debugging and diagnose.
Signed-off-by: Li Zhong <floridsleeves at gmail.com>
---
drivers/net/ethernet/intel/e1000e/phy.c | 20 +++++++++++++++++---
1 file changed, 17 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c
index fd07c3679bb1..060b263348ce 100644
--- a/drivers/net/ethernet/intel/e1000e/phy.c
+++ b/drivers/net/ethernet/intel/e1000e/phy.c
@@ -2697,9 +2697,14 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
void e1000_power_up_phy_copper(struct e1000_hw *hw)
{
u16 mii_reg = 0;
+ int ret;
/* The PHY will retain its settings across a power down/up cycle */
- e1e_rphy(hw, MII_BMCR, &mii_reg);
+ ret = e1e_rphy(hw, MII_BMCR, &mii_reg);
+ if (ret) {
+ e_dbg("Error reading PHY register\n");
+ return;
+ }
mii_reg &= ~BMCR_PDOWN;
e1e_wphy(hw, MII_BMCR, mii_reg);
}
@@ -2715,9 +2720,14 @@ void e1000_power_up_phy_copper(struct e1000_hw *hw)
void e1000_power_down_phy_copper(struct e1000_hw *hw)
{
u16 mii_reg = 0;
+ int ret;
/* The PHY will retain its settings across a power down/up cycle */
- e1e_rphy(hw, MII_BMCR, &mii_reg);
+ ret = e1e_rphy(hw, MII_BMCR, &mii_reg);
+ if (ret) {
+ e_dbg("Error reading PHY register\n");
+ return;
+ }
mii_reg |= BMCR_PDOWN;
e1e_wphy(hw, MII_BMCR, mii_reg);
usleep_range(1000, 2000);
@@ -3037,7 +3047,11 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw)
return 0;
/* Do not apply workaround if in PHY loopback bit 14 set */
- e1e_rphy(hw, MII_BMCR, &data);
+ ret_val = e1e_rphy(hw, MII_BMCR, &data);
+ if (ret_val) {
+ e_dbg("Error reading PHY register\n");
+ return ret_val;
+ }
if (data & BMCR_LOOPBACK)
return 0;
--
2.25.1
More information about the Intel-wired-lan
mailing list