[Intel-wired-lan] [PATCH bpf RFC 1/4] xdp: rss hash types representation

Stanislav Fomichev sdf at google.com
Wed Mar 29 23:19:15 UTC 2023


On 03/29, Jesper Dangaard Brouer wrote:

> On 29/03/2023 19.18, Stanislav Fomichev wrote:
> > On 03/29, Jesper Dangaard Brouer wrote:
> >
> > > On 28/03/2023 23.58, Stanislav Fomichev wrote:
> > > > On 03/28, Jesper Dangaard Brouer wrote:
> > > > > The RSS hash type specifies what portion of packet data NIC  
> hardware used
> > > > > when calculating RSS hash value. The RSS types are focused on  
> Internet
> > > > > traffic protocols at OSI layers L3 and L4. L2 (e.g. ARP) often  
> get hash
> > > > > value zero and no RSS type. For L3 focused on IPv4 vs. IPv6, and  
> L4
> > > > > primarily TCP vs UDP, but some hardware supports SCTP.
> > > >
> > > > > Hardware RSS types are differently encoded for each hardware NIC.  
> Most
> > > > > hardware represent RSS hash type as a number. Determining L3 vs  
> L4 often
> > > > > requires a mapping table as there often isn't a pattern or sorting
> > > > > according to ISO layer.
> > > >
> > > > > The patch introduce a XDP RSS hash type (xdp_rss_hash_type) that  
> can both
> > > > > be seen as a number that is ordered according by ISO layer, and  
> can be bit
> > > > > masked to separate IPv4 and IPv6 types for L4 protocols. Room is  
> available
> > > > > for extending later while keeping these properties. This maps and  
> unifies
> > > > > difference to hardware specific hashes.
> > > >
> > > > Looks good overall. Any reason we're making this specific layout?
> >
> > > One important goal is to have a simple/fast way to determining L3 vs  
> L4,
> > > because a L4 hash can be used for flow handling (e.g. load-balancing).
> >
> > > We below layout you can:
> >
> > >   if (rss_type & XDP_RSS_TYPE_L4_MASK)
> > >     bool hw_hash_do_LB = true;
> >
> > > Or using it as a number:
> >
> > >   if (rss_type > XDP_RSS_TYPE_L4)
> > >     bool hw_hash_do_LB = true;
> >
> > Why is it strictly better then the following?
> >
> > if (rss_type & (TYPE_UDP | TYPE_TCP | TYPE_SCTP)) {}
> >

> See V2 I dropped the idea of this being a number (that idea was not a
> good idea).

👍

> > If we add some new L4 format, the bpf programs can be updated to support
> > it?
> >
> > > I'm very open to changes to my "specific" layout.  I am in doubt if
> > > using it as a number is the right approach and worth the trouble.
> >
> > > > Why not simply the following?
> > > >
> > > > enum {
> > > >  ����XDP_RSS_TYPE_NONE = 0,
> > > >  ����XDP_RSS_TYPE_IPV4 = BIT(0),
> > > >  ����XDP_RSS_TYPE_IPV6 = BIT(1),
> > > >  ����/* IPv6 with extension header. */
> > > >  ����/* let's note ^^^ it in the UAPI? */
> > > >  ����XDP_RSS_TYPE_IPV6_EX = BIT(2),
> > > >  ����XDP_RSS_TYPE_UDP = BIT(3),
> > > >  ����XDP_RSS_TYPE_TCP = BIT(4),
> > > >  ����XDP_RSS_TYPE_SCTP = BIT(5),
> >
> > > We know these bits for UDP, TCP, SCTP (and IPSEC) are exclusive, they
> > > cannot be set at the same time, e.g. as a packet cannot both be UDP  
> and
> > > TCP.  Thus, using these bits as a number make sense to me, and is more
> > > compact.
> >
> > [..]
> >
> > > This BIT() approach also have the issue of extending it later (forward
> > > compatibility).  As mentioned a common task will be to check if
> > > hash-type is a L4 type.  See mlx5 [patch 4/4] needed to extend with
> > > IPSEC. Notice how my XDP_RSS_TYPE_L4_MASK covers all the bits that  
> this
> > > can be extended with new L4 types, such that existing progs will still
> > > work checking for L4 check.  It can of-cause be solved in the same way
> > > for this BIT() approach by reserving some bits upfront in a mask.
> >
> > We're using 6 bits out of 64, we should be good for awhile? If there
> > is ever a forward compatibility issue, we can always come up with
> > a new kfunc.

> I want/need store the RSS-type in the xdp_frame, for XDP_REDIRECT and
> SKB use-cases.  Thus, I don't want to use 64-bit/8-bytes, as xdp_frame
> size is limited (given it reduces headroom expansion).

> >
> > One other related question I have is: should we export the type
> > over some additional new kfunc argument? (instead of abusing the return
> > type)

> Good question. I was also wondering if it wouldn't be better to add
> another kfunc argument with the rss_hash_type?

> That will change the call signature, so that will not be easy to handle
> between kernel releases.

Agree with Toke on a separate thread; might not be too late to fit it
into an rc..

> > Maybe that will let us drop the explicit BTF_TYPE_EMIT as well?

> Sure, if we define it as an argument, then it will automatically
> exported as BTF.

> > > > }
> > > >
> > > > And then using XDP_RSS_TYPE_IPV4|XDP_RSS_TYPE_UDP vs
> > > > XDP_RSS_TYPE_IPV6|XXX ?
> >
> > > Do notice, that I already does some level of or'ing ("|") in this
> > > proposal.  The main difference is that I hide this from the driver,  
> and
> > > kind of pre-combine the valid combination (enum's) drivers can select
> > > from. I do get the point, and I think I will come up with a combined
> > > solution based on your input.
> >
> >
> > > The RSS hashing types and combinations comes from M$ standards:
> > >   [1]  
> https://learn.microsoft.com/en-us/windows-hardware/drivers/network/rss-hashing-types#ipv4-hash-type-combinations
> >
> > My main concern here is that we're over-complicating it with the masks
> > and the format. With the explicit bits we can easily map to that
> > spec you mention.

> See if you like my RFC-V2 proposal better.
> It should go more in your direction.

Yeah, I like it better. Btw, why have a separate bit for XDP_RSS_BIT_EX?
Any reason it's not a XDP_RSS_L3_IPV6_EX within XDP_RSS_L3_MASK?

And the following part seems like a leftover from the earlier version:

+/* For partitioning of xdp_rss_hash_type */
+#define RSS_L3		GENMASK(2,0) /* 3-bits = values between 1-7 */
+#define L4_BIT		BIT(3)       /* 1-bit - L4 indication */
+#define RSS_L4_IPV4	GENMASK(6,4) /* 3-bits */
+#define RSS_L4_IPV6	GENMASK(9,7) /* 3-bits */
+#define RSS_L4		GENMASK(9,3) /* = 7-bits - covering L4 IPV4+IPV6 */
+#define L4_IPV6_EX_BIT	BIT(9)       /* 1-bit - L4 IPv6 with Extension hdr  
*/
+				     /* 11-bits in total */

> > For example, for forward compat, I'm not sure we can assume that the  
> people
> > will do:
> >      "rss_type & XDP_RSS_TYPE_L4_MASK"
> > instead of something like:
> >      "rss_type & (XDP_RSS_TYPE_L4_IPV4_TCP|XDP_RSS_TYPE_L4_IPV4_UDP)"
> >

> This code is allowed in V2 and should be. It is a choice of
> BPF-programmer in line-2 to not be forward compatible with newer L4 types.

> > > > > This proposal change the kfunc API bpf_xdp_metadata_rx_hash() to   
> return
> > > > > this RSS hash type on success.

> This is the real question (as also raised above)...
> Should we use return value or add an argument for type?

Let's fix the prototype while it's still early in the rc?
Maybe also extend the tests to drop/decode/verify the mask?

> --Jesper



More information about the Intel-wired-lan mailing list