[Intel-wired-lan] [ixgbe] regression: jumbo frames not working

[Linux regression tracking #update (Thorsten Leemhuis)]

On 06.05.23 20:33, Jesse Brandeburg wrote:
> On Fri, May 5, 2023 at 1:28 PM Ian Kumlien <ian.kumlien at gmail.com
> <mailto:ian.kumlien at gmail.com>> wrote:
> 
>     As a side note, I don't understand how the switch booted with jumbo
>     frames off - the config stated that they should be on....
>     So, some kind of failover... sorry for the noise..
> 
>     On Fri, May 5, 2023 at 7:50 PM Ian Kumlien <ian.kumlien at gmail.com
>     <mailto:ian.kumlien at gmail.com>> wrote:
>     >
>     > Sorry... It seems like my cisco switch booted with jumbo-frames
>     > disabled after a power outage...
>     > The conf says it should be enabled - but somehow it wasn't :/
> 
> 
> 
> Thanks for letting us know!
> #regzbot resolve: not a regression. The reporter found the cause to be a
> network config issue after a power outage. 

Jesse, many thx for this, but this didn't work, as regzbot expects
commands to be in a separate paragraph to avoid catching things not
meant for it. So let me realize your intention:

#regzbot resolve: not a regression. The reporter found the cause to be a
network config issue after a power outage.

Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat)
--
Everything you wanna know about Linux kernel regression tracking:
https://linux-regtracking.leemhuis.info/about/#tldr
That page also explains what to do if mails like this annoy you.