[Intel-wired-lan] [PATCH iwl-next v5 00/15] Introduce Intel IDPF driver
Emil Tantilov
emil.s.tantilov at intel.com
Sat May 13 22:56:55 UTC 2023
This patch series introduces the Intel Infrastructure Data Path Function
(IDPF) driver. It is used for both physical and virtual functions. Except
for some of the device operations the rest of the functionality is the
same for both PF and VF. IDPF uses virtchnl version2 opcodes and
structures defined in the virtchnl2 header file which helps the driver
to learn the capabilities and register offsets from the device
Control Plane (CP) instead of assuming the default values.
The format of the series follows the driver init flow to interface open.
To start with, probe gets called and kicks off the driver initialization
by spawning the 'vc_event_task' work queue which in turn calls the
'hard reset' function. As part of that, the mailbox is initialized which
is used to send/receive the virtchnl messages to/from the CP. Once that is
done, 'core init' kicks in which requests all the required global resources
from the CP and spawns the 'init_task' work queue to create the vports.
Based on the capability information received, the driver creates the said
number of vports (one or many) where each vport is associated to a netdev.
Also, each vport has its own resources such as queues, vectors etc.
>From there, rest of the netdev_ops and data path are added.
IDPF implements both single queue which is traditional queueing model
as well as split queue model. In split queue model, it uses separate queue
for both completion descriptors and buffers which helps to implement
out-of-order completions. It also helps to implement asymmetric queues,
for example multiple RX completion queues can be processed by a single
RX buffer queue and multiple TX buffer queues can be processed by a
single TX completion queue. In single queue model, same queue is used
for both descriptor completions as well as buffer completions. It also
supports features such as generic checksum offload, generic receive
offload (hardware GRO) etc.
v4 --> v5: link [4]
(patch 4):
* improved error handling in the init path
(patch 5):
* added check for adapter->vports before de-allocating vport resources in
the service task
* added check for adapter->netdevs and removed redundant msleep in idpf_remove()
* corrected s/simulatenously/simultaneously/ in comment
(patch 10):
* removed inline from idpf_tx_splitq_bump_ntu()
* renamed s/parms/params/ to be consistent with rest of naming in code
(patch 12):
* corrected s/specifcally/specifically/ in comment
(patch 13):
* removed inline from idpf_rx_singleq_extract_base_fields() and
idpf_rx_singleq_extract_flex_fields()
(patch 14):
* removed "port-" prefix from some stats
* fixed setting adaptive coalescing
(patch 15):
* added toctree entry
* fixed formatting, table of contents, notes and some wording in the docs
[4] https://lore.kernel.org/netdev/20230508194326.482-1-emil.s.tantilov@intel.com/
v3 --> v4: link [3]
(patch 1):
* cleanups in virtchnl2 including redundant error codes, naming and
whitespace
(patch 3):
* removed "__" prefix from names of adapter and vport flags, converted
comments to kernel-doc style
* renamed error code variable names in controlq to be more consistent
with rest of the code
* removed Control Plane specific opcodes and changed "peer" type comments
to CP
* replaced managed dma calls with their non-managed equivalent
(patch 4):
* added additional info to some error messages on init to aid in debug
* removed unnecessary zero-init before loop and zeroing memcpy after
kzalloc()
* corrected wording of comment in idpf_wait_for_event() s/wake up/woken/
* replaced managed dma calls with their non-managed equivalent
[3] https://lore.kernel.org/netdev/20230427020917.12029-1-emil.s.tantilov@intel.com/
v2 --> v3: link [2]
* converted virtchnl2 defines to enums
* fixed comment style in virtchnl2 to follow kernel-doc format
* removed empty lines between end of structs and size check macro
checkpatch will mark these instances as CHECK
* cleaned up unused Rx descriptor structs and related bits in virtchnl2
* converted Rx descriptor bit offsets into bitmasks to better align with
the use of GENMASK and FIELD_GET
* added device ids to pci_tbl from the start
* consolidated common probe and remove functions into idpf_probe() and
idpf_remove() respectively
* removed needless adapter NULL checks
* removed devm_kzalloc() in favor of kzalloc(), including kfree in
error and exit code path
* replaced instances of kcalloc() calls where either size parameter was
1 with kzalloc(), reported by smatch
* used kmemdup() in some instances reported by coccicheck
* added explicit error code and comment explaining the condition for
the exit to address warning by smatch
* moved build support to the last patch
[2] https://lore.kernel.org/netdev/20230411011354.2619359-1-pavan.kumar.linga@intel.com/
v1 --> v2: link [1]
* removed the OASIS reference in the commit message to make it clear
that this is an Intel vendor specific driver
* fixed misspells
* used comment starter "/**" for struct and definition headers in
virtchnl header files
* removed AVF reference
* renamed APF reference to IDPF
* added a comment to explain the reason for 'no flex field' at the end of
virtchnl2_get_ptype_info struct
* removed 'key[1]' in virtchnl2_rss_key struct as it is not used
* set VIRTCHNL2_RXDID_2_FLEX_SQ_NIC to VIRTCHNL2_RXDID_2_FLEX_SPLITQ
instead of assigning the same value
* cleanup unnecessary NULL assignment to the rx_buf skb pointer since
it is not used in splitq model
* added comments to clarify the generation bit usage in splitq model
* introduced 'reuse_bias' in the page_info structure and make use of it
in the hot path
* fixed RCT format in idpf_rx_construct_skb
* report SPEED_UNKNOWN and DUPLEX_UNKNOWN when the link is down
* fixed -Wframe-larger-than warning reported by lkp bot in
idpf_vport_queue_ids_init
* updated the documentation in idpf.rst to fix LKP bot warning
[1] https://lore.kernel.org/netdev/20230329140404.1647925-1-pavan.kumar.linga@intel.com/
Alan Brady (4):
idpf: configure resources for TX queues
idpf: configure resources for RX queues
idpf: add RX splitq napi poll support
idpf: add ethtool callbacks
Joshua Hay (5):
idpf: add controlq init and reset checks
idpf: add splitq start_xmit
idpf: add TX splitq napi poll support
idpf: add singleq start_xmit and napi poll
idpf: configure SRIOV and add other ndo_ops
Pavan Kumar Linga (5):
virtchnl: add virtchnl version 2 ops
idpf: add core init and interrupt request
idpf: add create vport and netdev configuration
idpf: continue expanding init task
idpf: initialize interrupts and enable vport
Phani Burra (1):
idpf: add module register and probe functionality
.../device_drivers/ethernet/index.rst | 1 +
.../device_drivers/ethernet/intel/idpf.rst | 160 +
drivers/net/ethernet/intel/Kconfig | 10 +
drivers/net/ethernet/intel/Makefile | 1 +
drivers/net/ethernet/intel/idpf/Makefile | 18 +
drivers/net/ethernet/intel/idpf/idpf.h | 752 +++
.../net/ethernet/intel/idpf/idpf_controlq.c | 641 +++
.../net/ethernet/intel/idpf/idpf_controlq.h | 131 +
.../ethernet/intel/idpf/idpf_controlq_api.h | 169 +
.../ethernet/intel/idpf/idpf_controlq_setup.c | 175 +
drivers/net/ethernet/intel/idpf/idpf_dev.c | 165 +
drivers/net/ethernet/intel/idpf/idpf_devids.h | 10 +
.../net/ethernet/intel/idpf/idpf_ethtool.c | 1332 +++++
.../ethernet/intel/idpf/idpf_lan_pf_regs.h | 124 +
.../net/ethernet/intel/idpf/idpf_lan_txrx.h | 293 +
.../ethernet/intel/idpf/idpf_lan_vf_regs.h | 128 +
drivers/net/ethernet/intel/idpf/idpf_lib.c | 2354 ++++++++
drivers/net/ethernet/intel/idpf/idpf_main.c | 269 +
drivers/net/ethernet/intel/idpf/idpf_mem.h | 20 +
.../ethernet/intel/idpf/idpf_singleq_txrx.c | 1251 +++++
drivers/net/ethernet/intel/idpf/idpf_txrx.c | 4854 +++++++++++++++++
drivers/net/ethernet/intel/idpf/idpf_txrx.h | 854 +++
drivers/net/ethernet/intel/idpf/idpf_vf_dev.c | 164 +
.../net/ethernet/intel/idpf/idpf_virtchnl.c | 3827 +++++++++++++
drivers/net/ethernet/intel/idpf/virtchnl2.h | 1301 +++++
.../ethernet/intel/idpf/virtchnl2_lan_desc.h | 448 ++
26 files changed, 19452 insertions(+)
create mode 100644 Documentation/networking/device_drivers/ethernet/intel/idpf.rst
create mode 100644 drivers/net/ethernet/intel/idpf/Makefile
create mode 100644 drivers/net/ethernet/intel/idpf/idpf.h
create mode 100644 drivers/net/ethernet/intel/idpf/idpf_controlq.c
create mode 100644 drivers/net/ethernet/intel/idpf/idpf_controlq.h
create mode 100644 drivers/net/ethernet/intel/idpf/idpf_controlq_api.h
create mode 100644 drivers/net/ethernet/intel/idpf/idpf_controlq_setup.c
create mode 100644 drivers/net/ethernet/intel/idpf/idpf_dev.c
create mode 100644 drivers/net/ethernet/intel/idpf/idpf_devids.h
create mode 100644 drivers/net/ethernet/intel/idpf/idpf_ethtool.c
create mode 100644 drivers/net/ethernet/intel/idpf/idpf_lan_pf_regs.h
create mode 100644 drivers/net/ethernet/intel/idpf/idpf_lan_txrx.h
create mode 100644 drivers/net/ethernet/intel/idpf/idpf_lan_vf_regs.h
create mode 100644 drivers/net/ethernet/intel/idpf/idpf_lib.c
create mode 100644 drivers/net/ethernet/intel/idpf/idpf_main.c
create mode 100644 drivers/net/ethernet/intel/idpf/idpf_mem.h
create mode 100644 drivers/net/ethernet/intel/idpf/idpf_singleq_txrx.c
create mode 100644 drivers/net/ethernet/intel/idpf/idpf_txrx.c
create mode 100644 drivers/net/ethernet/intel/idpf/idpf_txrx.h
create mode 100644 drivers/net/ethernet/intel/idpf/idpf_vf_dev.c
create mode 100644 drivers/net/ethernet/intel/idpf/idpf_virtchnl.c
create mode 100644 drivers/net/ethernet/intel/idpf/virtchnl2.h
create mode 100644 drivers/net/ethernet/intel/idpf/virtchnl2_lan_desc.h
--
2.17.2
More information about the Intel-wired-lan
mailing list