[Intel-wired-lan] [PATCH v7 iwl-next 4/7] ice: don't check has_ready_bitmap in E810 functions
Karol Kolacinski
karol.kolacinski at intel.com
Tue Jan 23 10:51:28 UTC 2024
From: Jacob Keller <jacob.e.keller at intel.com>
E810 hardware does not have a Tx timestamp ready bitmap. Don't check
has_ready_bitmap in E810-specific functions.
Add has_ready_bitmap check in ice_ptp_process_tx_tstamp() to stop
relying on the fact that ice_get_phy_tx_tstamp_ready() returns all 1s.
Signed-off-by: Jacob Keller <jacob.e.keller at intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski at intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller at intel.com>
---
V5 -> V6: introduced this patch which was a part of a previous one
drivers/net/ethernet/intel/ice/ice_ptp.c | 23 +++++++++++------------
1 file changed, 11 insertions(+), 12 deletions(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_ptp.c b/drivers/net/ethernet/intel/ice/ice_ptp.c
index a10e0018b2e2..69d11dbda22c 100644
--- a/drivers/net/ethernet/intel/ice/ice_ptp.c
+++ b/drivers/net/ethernet/intel/ice/ice_ptp.c
@@ -601,17 +601,13 @@ void ice_ptp_complete_tx_single_tstamp(struct ice_ptp_tx *tx)
/* Read the low 32 bit value */
raw_tstamp |= (u64)rd32(&pf->hw, PF_SB_ATQBAH);
- /* For PHYs which don't implement a proper timestamp ready bitmap,
- * verify that the timestamp value is different from the last cached
- * timestamp. If it is not, skip this for now assuming it hasn't yet
- * been captured by hardware.
+ /* Devices using this interface always verify the timestamp differs
+ * relative to the last cached timestamp value.
*/
- if (!drop_ts && !tx->has_ready_bitmap &&
- raw_tstamp == tx->tstamps[idx].cached_tstamp)
+ if (raw_tstamp == tx->tstamps[idx].cached_tstamp)
return;
- if (!tx->has_ready_bitmap && raw_tstamp)
- tx->tstamps[idx].cached_tstamp = raw_tstamp;
+ tx->tstamps[idx].cached_tstamp = raw_tstamp;
clear_bit(idx, tx->in_use);
skb = tx->tstamps[idx].skb;
tx->tstamps[idx].skb = NULL;
@@ -701,9 +697,11 @@ static void ice_ptp_process_tx_tstamp(struct ice_ptp_tx *tx)
hw = &pf->hw;
/* Read the Tx ready status first */
- err = ice_get_phy_tx_tstamp_ready(hw, tx->block, &tstamp_ready);
- if (err)
- return;
+ if (tx->has_ready_bitmap) {
+ err = ice_get_phy_tx_tstamp_ready(hw, tx->block, &tstamp_ready);
+ if (err)
+ return;
+ }
/* Drop packets if the link went down */
link_up = ptp_port->link_up;
@@ -731,7 +729,8 @@ static void ice_ptp_process_tx_tstamp(struct ice_ptp_tx *tx)
* If we do not, the hardware logic for generating a new
* interrupt can get stuck on some devices.
*/
- if (!(tstamp_ready & BIT_ULL(phy_idx))) {
+ if (tx->has_ready_bitmap &&
+ !(tstamp_ready & BIT_ULL(phy_idx))) {
if (drop_ts)
goto skip_ts_read;
--
2.40.1
More information about the Intel-wired-lan
mailing list