[Intel-wired-lan] [PATCH iwl-next v4 2/2] ice: Implement 'flow-type ether' rules

[Brett Creeley]

On 1/24/2024 7:21 AM, Lukasz Plachno wrote:
> Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
> 
> 
> From: Jakub Buchocki <jakubx.buchocki at intel.com>
> 
> Add support for 'flow-type ether' Flow Director rules via ethtool.
> 
> Rules not containing masks are processed by the Flow Director,
> and support the following set of input parameters in all combinations:
> src, dst, proto, vlan-etype, vlan, action.
> 
> It is possible to specify address mask in ethtool parameters but only
> 00:00:00:00:00 and FF:FF:FF:FF:FF are valid.
> The same applies to proto, vlan-etype and vlan masks:
> only 0x0000 and 0xffff masks are valid.
> 
> Signed-off-by: Jakub Buchocki <jakubx.buchocki at intel.com>
> Co-developed-by: Mateusz Pacuszka <mateuszx.pacuszka at intel.com>
> Signed-off-by: Mateusz Pacuszka <mateuszx.pacuszka at intel.com>
> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel at intel.com>
> Signed-off-by: Lukasz Plachno <lukasz.plachno at intel.com>
> ---
>   .../net/ethernet/intel/ice/ice_ethtool_fdir.c | 140 +++++++++++++++++-
>   drivers/net/ethernet/intel/ice/ice_fdir.c     |  27 ++++
>   drivers/net/ethernet/intel/ice/ice_fdir.h     |  11 ++
>   drivers/net/ethernet/intel/ice/ice_type.h     |   1 +
>   4 files changed, 178 insertions(+), 1 deletion(-)

FWIW, Seems okay to me. Thanks for adding the warning prints.

Reviewed-by: Brett Creeley <brett.creeley at amd.com>

[...]