[Intel-wired-lan] [PATCH iwl-net] i40e: fix vf may be used uninitialized in this function warning

Aleksandr Loktionov aleksandr.loktionov at intel.com
Mon Mar 11 11:25:03 UTC 2024


To fix the regression introduced by 52424f974bc5 commit, wchich causes
servers hang in very hard to reproduce conditions with resets races.

Remove redundant "v" variable and iterate via single VF pointer across
whole function instead to guarantee VF pointer validity.

Fixes: 52424f974bc5 ("i40e: Fix VF hang when reset is triggered on another VF")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov at intel.com>
---
 .../ethernet/intel/i40e/i40e_virtchnl_pf.c    | 34 +++++++++----------
 1 file changed, 16 insertions(+), 18 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index b34c717..f7c4654 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -1628,105 +1628,103 @@ bool i40e_reset_all_vfs(struct i40e_pf *pf, bool flr)
 {
 	struct i40e_hw *hw = &pf->hw;
 	struct i40e_vf *vf;
-	int i, v;
 	u32 reg;
+	int i;
 
 	/* If we don't have any VFs, then there is nothing to reset */
 	if (!pf->num_alloc_vfs)
 		return false;
 
 	/* If VFs have been disabled, there is no need to reset */
 	if (test_and_set_bit(__I40E_VF_DISABLE, pf->state))
 		return false;
 
 	/* Begin reset on all VFs at once */
-	for (v = 0; v < pf->num_alloc_vfs; v++) {
-		vf = &pf->vf[v];
+	for (vf = &pf->vf[0]; vf < &pf->vf[pf->num_alloc_vfs]; ++vf) {
 		/* If VF is being reset no need to trigger reset again */
 		if (!test_bit(I40E_VF_STATE_RESETTING, &vf->vf_states))
-			i40e_trigger_vf_reset(&pf->vf[v], flr);
+			i40e_trigger_vf_reset(vf, flr);
 	}
 
 	/* HW requires some time to make sure it can flush the FIFO for a VF
 	 * when it resets it. Poll the VPGEN_VFRSTAT register for each VF in
 	 * sequence to make sure that it has completed. We'll keep track of
 	 * the VFs using a simple iterator that increments once that VF has
 	 * finished resetting.
 	 */
-	for (i = 0, v = 0; i < 10 && v < pf->num_alloc_vfs; i++) {
+	for (i = 0, vf = &pf->vf[0]; i < 10 && vf < &pf->vf[pf->num_alloc_vfs]; ++i) {
 		usleep_range(10000, 20000);
 
 		/* Check each VF in sequence, beginning with the VF to fail
 		 * the previous check.
 		 */
-		while (v < pf->num_alloc_vfs) {
-			vf = &pf->vf[v];
+		while (vf < &pf->vf[pf->num_alloc_vfs]) {
 			if (!test_bit(I40E_VF_STATE_RESETTING, &vf->vf_states)) {
 				reg = rd32(hw, I40E_VPGEN_VFRSTAT(vf->vf_id));
 				if (!(reg & I40E_VPGEN_VFRSTAT_VFRD_MASK))
 					break;
 			}
 
 			/* If the current VF has finished resetting, move on
 			 * to the next VF in sequence.
 			 */
-			v++;
+			++vf;
 		}
 	}
 
 	if (flr)
 		usleep_range(10000, 20000);
 
 	/* Display a warning if at least one VF didn't manage to reset in
 	 * time, but continue on with the operation.
 	 */
-	if (v < pf->num_alloc_vfs)
+	if (vf < &pf->vf[pf->num_alloc_vfs])
 		dev_err(&pf->pdev->dev, "VF reset check timeout on VF %d\n",
-			pf->vf[v].vf_id);
+			vf->vf_id);
 	usleep_range(10000, 20000);
 
 	/* Begin disabling all the rings associated with VFs, but do not wait
 	 * between each VF.
 	 */
-	for (v = 0; v < pf->num_alloc_vfs; v++) {
+	for (vf = &pf->vf[0]; vf < &pf->vf[pf->num_alloc_vfs]; ++vf) {
 		/* On initial reset, we don't have any queues to disable */
-		if (pf->vf[v].lan_vsi_idx == 0)
+		if (vf->lan_vsi_idx == 0)
 			continue;
 
 		/* If VF is reset in another thread just continue */
 		if (test_bit(I40E_VF_STATE_RESETTING, &vf->vf_states))
 			continue;
 
-		i40e_vsi_stop_rings_no_wait(pf->vsi[pf->vf[v].lan_vsi_idx]);
+		i40e_vsi_stop_rings_no_wait(pf->vsi[vf->lan_vsi_idx]);
 	}
 
 	/* Now that we've notified HW to disable all of the VF rings, wait
 	 * until they finish.
 	 */
-	for (v = 0; v < pf->num_alloc_vfs; v++) {
+	for (vf = &pf->vf[0]; vf < &pf->vf[pf->num_alloc_vfs]; ++vf) {
 		/* On initial reset, we don't have any queues to disable */
-		if (pf->vf[v].lan_vsi_idx == 0)
+		if (vf->lan_vsi_idx == 0)
 			continue;
 
 		/* If VF is reset in another thread just continue */
 		if (test_bit(I40E_VF_STATE_RESETTING, &vf->vf_states))
 			continue;
 
-		i40e_vsi_wait_queues_disabled(pf->vsi[pf->vf[v].lan_vsi_idx]);
+		i40e_vsi_wait_queues_disabled(pf->vsi[vf->lan_vsi_idx]);
 	}
 
 	/* Hw may need up to 50ms to finish disabling the RX queues. We
 	 * minimize the wait by delaying only once for all VFs.
 	 */
 	mdelay(50);
 
 	/* Finish the reset on each VF */
-	for (v = 0; v < pf->num_alloc_vfs; v++) {
+	for (vf = &pf->vf[0]; vf < &pf->vf[pf->num_alloc_vfs]; ++vf) {
 		/* If VF is reset in another thread just continue */
 		if (test_bit(I40E_VF_STATE_RESETTING, &vf->vf_states))
 			continue;
 
-		i40e_cleanup_reset_vf(&pf->vf[v]);
+		i40e_cleanup_reset_vf(vf);
 	}
 
 	i40e_flush(hw);
-- 
2.25.1



More information about the Intel-wired-lan mailing list