[Intel-wired-lan] [PATCH net] i40e: Enforce software interrupt during busy-poll exit

Ivan Vecera ivecera at redhat.com
Wed Mar 13 12:54:56 UTC 2024


As for ice bug fixed by commit b7306b42beaf ("ice: manage interrupts
during poll exit") I'm seeing the similar issue also with i40e driver.

In certain situation when busy-loop is enabled together with adaptive
coalescing, the driver occasionally miss that there are outstanding
descriptors to clean when exiting busy poll.

Try to catch the remaining work by triggering a software interrupt
when exiting busy poll. No extra interrupts will be generated when
busy polling is not used.

The issue was found when running sockperf ping-pong tcp test with
adaptive coalescing and busy poll enabled (50 as value busy_pool
and busy_read sysctl knobs) and results in huge latency spikes
with more than 100000us.

The fix is inspired from the ice driver and do the following:
1) During napi poll exit in case of busy-poll (napo_complete_done()
   returns false) this is recorded to q_vector that we were in busy
   loop.
2) In i40e_update_enable_itr()
   - updates refreshed ITR intervals directly using PFINT_ITRN register
   - if we are exiting ordinary poll then just enables the interrupt
     using PFINT_DYN_CTLN
   - if we are exiting busy poll then enables the interrupt and
     additionally triggers an immediate software interrupt to catch any
     pending clean-ups
3) Reuses unused 3rd ITR (interrupt throttle) index and set it to
   20K interrupts per second to limit the number of these sw interrupts.

Test results
============
Prior:
[root at dell-per640-07 net]# sockperf ping-pong -i 10.9.9.1 --tcp -m 1000 --mps=max -t 120
sockperf: == version #3.10-no.git ==
sockperf[CLIENT] send on:sockperf: using recvfrom() to block on socket(s)

[ 0] IP = 10.9.9.1        PORT = 11111 # TCP
sockperf: Warmup stage (sending a few dummy messages)...
sockperf: Starting test...
sockperf: Test end (interrupted by timer)
sockperf: Test ended
sockperf: [Total Run] RunTime=119.999 sec; Warm up time=400 msec; SentMessages=2438563; ReceivedMessages=2438562
sockperf: ========= Printing statistics for Server No: 0
sockperf: [Valid Duration] RunTime=119.549 sec; SentMessages=2429473; ReceivedMessages=2429473
sockperf: ====> avg-latency=24.571 (std-dev=93.297, mean-ad=4.904, median-ad=1.510, siqr=1.063, cv=3.797, std-error=0.060, 99.0% ci=[24.417, 24.725])
sockperf: # dropped messages = 0; # duplicated messages = 0; # out-of-order messages = 0
sockperf: Summary: Latency is 24.571 usec
sockperf: Total 2429473 observations; each percentile contains 24294.73 observations
sockperf: ---> <MAX> observation = 103294.331
sockperf: ---> percentile 99.999 =   45.633
sockperf: ---> percentile 99.990 =   37.013
sockperf: ---> percentile 99.900 =   35.910
sockperf: ---> percentile 99.000 =   33.390
sockperf: ---> percentile 90.000 =   28.626
sockperf: ---> percentile 75.000 =   27.741
sockperf: ---> percentile 50.000 =   26.743
sockperf: ---> percentile 25.000 =   25.614
sockperf: ---> <MIN> observation =   12.220

After:
[root at dell-per640-07 net]# sockperf ping-pong -i 10.9.9.1 --tcp -m 1000 --mps=max -t 120
sockperf: == version #3.10-no.git ==
sockperf[CLIENT] send on:sockperf: using recvfrom() to block on socket(s)

[ 0] IP = 10.9.9.1        PORT = 11111 # TCP
sockperf: Warmup stage (sending a few dummy messages)...
sockperf: Starting test...
sockperf: Test end (interrupted by timer)
sockperf: Test ended
sockperf: [Total Run] RunTime=119.999 sec; Warm up time=400 msec; SentMessages=2400055; ReceivedMessages=2400054
sockperf: ========= Printing statistics for Server No: 0
sockperf: [Valid Duration] RunTime=119.549 sec; SentMessages=2391186; ReceivedMessages=2391186
sockperf: ====> avg-latency=24.965 (std-dev=5.934, mean-ad=4.642, median-ad=1.485, siqr=1.067, cv=0.238, std-error=0.004, 99.0% ci=[24.955, 24.975])
sockperf: # dropped messages = 0; # duplicated messages = 0; # out-of-order messages = 0
sockperf: Summary: Latency is 24.965 usec
sockperf: Total 2391186 observations; each percentile contains 23911.86 observations
sockperf: ---> <MAX> observation =  195.841
sockperf: ---> percentile 99.999 =   45.026
sockperf: ---> percentile 99.990 =   39.009
sockperf: ---> percentile 99.900 =   35.922
sockperf: ---> percentile 99.000 =   33.482
sockperf: ---> percentile 90.000 =   28.902
sockperf: ---> percentile 75.000 =   27.821
sockperf: ---> percentile 50.000 =   26.860
sockperf: ---> percentile 25.000 =   25.685
sockperf: ---> <MIN> observation =   12.277

Reported-by: Hugo Ferreira <hferreir at redhat.com>
Signed-off-by: Ivan Vecera <ivecera at redhat.com>
---
 drivers/net/ethernet/intel/i40e/i40e.h        |  1 +
 drivers/net/ethernet/intel/i40e/i40e_main.c   |  6 +++
 .../net/ethernet/intel/i40e/i40e_register.h   |  2 +
 drivers/net/ethernet/intel/i40e/i40e_txrx.c   | 46 ++++++++++++++-----
 drivers/net/ethernet/intel/i40e/i40e_txrx.h   |  1 +
 5 files changed, 45 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index 9b701615c7c6..4d2b05de6c63 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -908,6 +908,7 @@ struct i40e_q_vector {
 	struct rcu_head rcu;	/* to avoid race with update stats on free */
 	char name[I40E_INT_NAME_STR_LEN];
 	bool arm_wb_state;
+	bool in_busy_poll;
 	int irq_num;		/* IRQ assigned to this q_vector */
 } ____cacheline_internodealigned_in_smp;
 
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 89a3401d20ab..1ea6d06b0acc 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -3915,6 +3915,12 @@ static void i40e_vsi_configure_msix(struct i40e_vsi *vsi)
 		     q_vector->tx.target_itr >> 1);
 		q_vector->tx.current_itr = q_vector->tx.target_itr;
 
+		/* Set ITR for software interrupts triggered after exiting
+		 * busy-loop polling.
+		 */
+		wr32(hw, I40E_PFINT_ITRN(I40E_SW_ITR, vector - 1),
+		     I40E_ITR_20K);
+
 		wr32(hw, I40E_PFINT_RATEN(vector - 1),
 		     i40e_intrl_usec_to_reg(vsi->int_rate_limit));
 
diff --git a/drivers/net/ethernet/intel/i40e/i40e_register.h b/drivers/net/ethernet/intel/i40e/i40e_register.h
index 14ab642cafdb..baa6bb68bcf8 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_register.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_register.h
@@ -335,6 +335,8 @@
 #define I40E_PFINT_DYN_CTLN_INTERVAL_SHIFT 5
 #define I40E_PFINT_DYN_CTLN_SW_ITR_INDX_ENA_SHIFT 24
 #define I40E_PFINT_DYN_CTLN_SW_ITR_INDX_ENA_MASK I40E_MASK(0x1, I40E_PFINT_DYN_CTLN_SW_ITR_INDX_ENA_SHIFT)
+#define I40E_PFINT_DYN_CTLN_SW_ITR_INDX_SHIFT 25
+#define I40E_PFINT_DYN_CTLN_SW_ITR_INDX_MASK I40E_MASK(0x3, I40E_PFINT_DYN_CTLN_SW_ITR_INDX_SHIFT)
 #define I40E_PFINT_ICR0 0x00038780 /* Reset: CORER */
 #define I40E_PFINT_ICR0_INTEVENT_SHIFT 0
 #define I40E_PFINT_ICR0_INTEVENT_MASK I40E_MASK(0x1, I40E_PFINT_ICR0_INTEVENT_SHIFT)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index 0d7177083708..356c3140adf3 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -2658,8 +2658,22 @@ static inline u32 i40e_buildreg_itr(const int type, u16 itr)
 	return val;
 }
 
-/* a small macro to shorten up some long lines */
-#define INTREG I40E_PFINT_DYN_CTLN
+static inline u32 i40e_buildreg_swint(int type)
+{
+	u32 val;
+
+	/* 1. Enable the interrupt
+	 * 2. Do not modify any ITR interval
+	 * 3. Trigger a SW interrupt specified by type
+	 */
+	val = I40E_PFINT_DYN_CTLN_INTENA_MASK |
+	      I40E_PFINT_DYN_CTLN_ITR_INDX_MASK | /* set noitr */
+	      I40E_PFINT_DYN_CTLN_SWINT_TRIG_MASK |
+	      I40E_PFINT_DYN_CTLN_SW_ITR_INDX_ENA_MASK |
+	      FIELD_PREP(I40E_PFINT_DYN_CTLN_SW_ITR_INDX_MASK, type);
+
+	return val;
+}
 
 /* The act of updating the ITR will cause it to immediately trigger. In order
  * to prevent this from throwing off adaptive update statistics we defer the
@@ -2702,8 +2716,8 @@ static inline void i40e_update_enable_itr(struct i40e_vsi *vsi,
 	 */
 	if (q_vector->rx.target_itr < q_vector->rx.current_itr) {
 		/* Rx ITR needs to be reduced, this is highest priority */
-		intval = i40e_buildreg_itr(I40E_RX_ITR,
-					   q_vector->rx.target_itr);
+		wr32(hw, I40E_PFINT_ITRN(I40E_RX_ITR, q_vector->reg_idx),
+		     q_vector->rx.target_itr >> 1);
 		q_vector->rx.current_itr = q_vector->rx.target_itr;
 		q_vector->itr_countdown = ITR_COUNTDOWN_START;
 	} else if ((q_vector->tx.target_itr < q_vector->tx.current_itr) ||
@@ -2712,25 +2726,33 @@ static inline void i40e_update_enable_itr(struct i40e_vsi *vsi,
 		/* Tx ITR needs to be reduced, this is second priority
 		 * Tx ITR needs to be increased more than Rx, fourth priority
 		 */
-		intval = i40e_buildreg_itr(I40E_TX_ITR,
-					   q_vector->tx.target_itr);
+		wr32(hw, I40E_PFINT_ITRN(I40E_TX_ITR, q_vector->reg_idx),
+		     q_vector->tx.target_itr >> 1);
 		q_vector->tx.current_itr = q_vector->tx.target_itr;
 		q_vector->itr_countdown = ITR_COUNTDOWN_START;
 	} else if (q_vector->rx.current_itr != q_vector->rx.target_itr) {
 		/* Rx ITR needs to be increased, third priority */
-		intval = i40e_buildreg_itr(I40E_RX_ITR,
-					   q_vector->rx.target_itr);
+		wr32(hw, I40E_PFINT_ITRN(I40E_RX_ITR, q_vector->reg_idx),
+		     q_vector->rx.target_itr >> 1);
 		q_vector->rx.current_itr = q_vector->rx.target_itr;
 		q_vector->itr_countdown = ITR_COUNTDOWN_START;
 	} else {
 		/* No ITR update, lowest priority */
-		intval = i40e_buildreg_itr(I40E_ITR_NONE, 0);
 		if (q_vector->itr_countdown)
 			q_vector->itr_countdown--;
 	}
 
-	if (!test_bit(__I40E_VSI_DOWN, vsi->state))
-		wr32(hw, INTREG(q_vector->reg_idx), intval);
+	/* Do not enable interrupt if VSI is down */
+	if (test_bit(__I40E_VSI_DOWN, vsi->state))
+		return;
+
+	if (!q_vector->in_busy_poll) {
+		intval = i40e_buildreg_itr(I40E_ITR_NONE, 0);
+	} else {
+		q_vector->in_busy_poll = false;
+		intval = i40e_buildreg_swint(I40E_SW_ITR);
+	}
+	wr32(hw, I40E_PFINT_DYN_CTLN(q_vector->reg_idx), intval);
 }
 
 /**
@@ -2845,6 +2867,8 @@ int i40e_napi_poll(struct napi_struct *napi, int budget)
 	 */
 	if (likely(napi_complete_done(napi, work_done)))
 		i40e_update_enable_itr(vsi, q_vector);
+	else
+		q_vector->in_busy_poll = true;
 
 	return min(work_done, budget - 1);
 }
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.h b/drivers/net/ethernet/intel/i40e/i40e_txrx.h
index abf15067eb5d..2cdc7de6301c 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.h
@@ -68,6 +68,7 @@ enum i40e_dyn_idx {
 /* these are indexes into ITRN registers */
 #define I40E_RX_ITR    I40E_IDX_ITR0
 #define I40E_TX_ITR    I40E_IDX_ITR1
+#define I40E_SW_ITR    I40E_IDX_ITR2
 
 /* Supported RSS offloads */
 #define I40E_DEFAULT_RSS_HENA ( \
-- 
2.43.0



More information about the Intel-wired-lan mailing list