[Intel-wired-lan] [PATCH] e1000e: move force SMBUS near the end of enable_ulp function

naamax.meir naamax.meir at linux.intel.com
Thu May 2 07:00:07 UTC 2024


On 4/13/2024 12:27, Hui Wang wrote:
> The commit 861e8086029e ("e1000e: move force SMBUS from enable ulp
> function to avoid PHY loss issue") introduces a regression on
> CH_MTP_I219_LM18 (PCIID: 0x8086550A). Without this commit, the
> ethernet works well after suspend and resume, but after applying the
> commit, the ethernet couldn't work anymore after the resume and the
> dmesg shows that the NIC Link changes to 10Mbps (1000Mbps originally):
> [   43.305084] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 10 Mbps Full Duplex, Flow Control: Rx/Tx
> 
> Without the commit, the force SMBUS code will not be executed if
> "return 0" or "goto out" is executed in the enable_ulp(), and in my
> case, the "goto out" is executed since FWSM_FW_VALID is set. But after
> applying the commit, the force SMBUS code will be ran unconditionally.
> 
> Here move the force SMBUS code back to enable_ulp() and put it
> immediate ahead of hw->phy.ops.release(hw), this could allow the
> longest settling time as possible for interface in this function and
> doesn't change the original code logic.
> 
> Fixes: 861e8086029e ("e1000e: move force SMBUS from enable ulp function to avoid PHY loss issue")
> Signed-off-by: Hui Wang <hui.wang at canonical.com>
> ---
>   drivers/net/ethernet/intel/e1000e/ich8lan.c | 19 +++++++++++++++++++
>   drivers/net/ethernet/intel/e1000e/netdev.c  | 18 ------------------
>   2 files changed, 19 insertions(+), 18 deletions(-)

Tested-by: Naama Meir <naamax.meir at linux.intel.com>


More information about the Intel-wired-lan mailing list