[Intel-wired-lan] [PATCH RFC iwl-next 07/12] idpf: compile singleq code only under default-n CONFIG_IDPF_SINGLEQ
Tantilov, Emil S
emil.s.tantilov at intel.com
Tue May 14 02:01:30 UTC 2024
On 5/10/2024 8:26 AM, Alexander Lobakin wrote:
> Currently, there's no HW supporting idpf in the singleq model. Still,
> this dead code is supported by the driver and often times add hotpath
The driver supports the HW in single queue mode (not the other way
around), so I would like to point out that all current HW on which idpf
can load supports this model.
> branches and redundant cacheline accesses.
> While it can't currently be removed, add CONFIG_IDPF_SINGLEQ and build
> the singleq code only when it's enabled manually. This corresponds to
> -10 Kb of object code size and a good bunch of hotpath checks.
> idpf_is_queue_model_split() works as a gate and compiles out to `true`
> when the config option is disabled.
Compiling singleq out does introduce an issue for the users that would
end up without a netdev if the driver is loaded on a setup where the
Control Plane is configured for singlq mode. In that scenario the user
will have to recompile the driver/kernel in order to load the driver
successfully.
>
> Signed-off-by: Alexander Lobakin <aleksander.lobakin at intel.com>
> ---
> drivers/net/ethernet/intel/Kconfig | 13 +---------
> drivers/net/ethernet/intel/idpf/Kconfig | 26 +++++++++++++++++++
> drivers/net/ethernet/intel/idpf/Makefile | 3 ++-
> drivers/net/ethernet/intel/idpf/idpf.h | 3 ++-
> drivers/net/ethernet/intel/idpf/idpf_txrx.c | 2 +-
> .../net/ethernet/intel/idpf/idpf_virtchnl.c | 15 ++++++++---
> 6 files changed, 43 insertions(+), 19 deletions(-)
> create mode 100644 drivers/net/ethernet/intel/idpf/Kconfig
>
> diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
> index e0287fbd501d..0375c7448a57 100644
> --- a/drivers/net/ethernet/intel/Kconfig
> +++ b/drivers/net/ethernet/intel/Kconfig
> @@ -384,17 +384,6 @@ config IGC_LEDS
> Optional support for controlling the NIC LED's with the netdev
> LED trigger.
>
> -config IDPF
> - tristate "Intel(R) Infrastructure Data Path Function Support"
> - depends on PCI_MSI
> - select DIMLIB
> - select PAGE_POOL
> - select PAGE_POOL_STATS
> - help
> - This driver supports Intel(R) Infrastructure Data Path Function
> - devices.
> -
> - To compile this driver as a module, choose M here. The module
> - will be called idpf.
> +source "drivers/net/ethernet/intel/idpf/Kconfig"
>
> endif # NET_VENDOR_INTEL
> diff --git a/drivers/net/ethernet/intel/idpf/Kconfig b/drivers/net/ethernet/intel/idpf/Kconfig
> new file mode 100644
> index 000000000000..bee83a40f218
> --- /dev/null
> +++ b/drivers/net/ethernet/intel/idpf/Kconfig
> @@ -0,0 +1,26 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +# Copyright (C) 2024 Intel Corporation
> +
> +config IDPF
> + tristate "Intel(R) Infrastructure Data Path Function Support"
> + depends on PCI_MSI
> + select DIMLIB
> + select PAGE_POOL
> + select PAGE_POOL_STATS
> + help
> + This driver supports Intel(R) Infrastructure Data Path Function
> + devices.
> +
> + To compile this driver as a module, choose M here. The module
> + will be called idpf.
> +
> +if IDPF
> +
> +config IDPF_SINGLEQ
> + bool "idpf singleq support"
> + help
> + This option enables support for legacy single Rx/Tx queues w/no
> + completion and fill queues. Only enable if you have such hardware
This description is not accurate - all HW supports single queue. The
configuration is done by the Control Plane. Furthermore, without access
to the Control Plane config, there is no way for the user to know what
mode is enabled.
Thanks,
Emil
> + as it increases the driver size and adds runtme checks on hotpath.
> +
> +endif # IDPF
> diff --git a/drivers/net/ethernet/intel/idpf/Makefile b/drivers/net/ethernet/intel/idpf/Makefile
> index 6844ead2f3ac..2ce01a0b5898 100644
> --- a/drivers/net/ethernet/intel/idpf/Makefile
> +++ b/drivers/net/ethernet/intel/idpf/Makefile
> @@ -12,7 +12,8 @@ idpf-y := \
> idpf_ethtool.o \
> idpf_lib.o \
> idpf_main.o \
> - idpf_singleq_txrx.o \
> idpf_txrx.o \
> idpf_virtchnl.o \
> idpf_vf_dev.o
> +
> +idpf-$(CONFIG_IDPF_SINGLEQ) += idpf_singleq_txrx.o
> diff --git a/drivers/net/ethernet/intel/idpf/idpf.h b/drivers/net/ethernet/intel/idpf/idpf.h
> index f9e43d171f17..5d9529f5b41b 100644
> --- a/drivers/net/ethernet/intel/idpf/idpf.h
> +++ b/drivers/net/ethernet/intel/idpf/idpf.h
> @@ -599,7 +599,8 @@ struct idpf_adapter {
> */
> static inline int idpf_is_queue_model_split(u16 q_model)
> {
> - return q_model == VIRTCHNL2_QUEUE_MODEL_SPLIT;
> + return !IS_ENABLED(CONFIG_IDPF_SINGLEQ) ||
> + q_model == VIRTCHNL2_QUEUE_MODEL_SPLIT;
> }
>
> #define idpf_is_cap_ena(adapter, field, flag) \
> diff --git a/drivers/net/ethernet/intel/idpf/idpf_txrx.c b/drivers/net/ethernet/intel/idpf/idpf_txrx.c
> index 4aa5ee781bd7..2bc1a5a0b50f 100644
> --- a/drivers/net/ethernet/intel/idpf/idpf_txrx.c
> +++ b/drivers/net/ethernet/intel/idpf/idpf_txrx.c
> @@ -1306,7 +1306,7 @@ static void idpf_vport_calc_numq_per_grp(struct idpf_vport *vport,
> static void idpf_rxq_set_descids(const struct idpf_vport *vport,
> struct idpf_rx_queue *q)
> {
> - if (vport->rxq_model == VIRTCHNL2_QUEUE_MODEL_SPLIT) {
> + if (idpf_is_queue_model_split(vport->rxq_model)) {
> q->rxdids = VIRTCHNL2_RXDID_2_FLEX_SPLITQ_M;
> } else {
> if (vport->base_rxd)
> diff --git a/drivers/net/ethernet/intel/idpf/idpf_virtchnl.c b/drivers/net/ethernet/intel/idpf/idpf_virtchnl.c
> index 44602b87cd41..d1705fcb701a 100644
> --- a/drivers/net/ethernet/intel/idpf/idpf_virtchnl.c
> +++ b/drivers/net/ethernet/intel/idpf/idpf_virtchnl.c
> @@ -1256,12 +1256,12 @@ int idpf_send_create_vport_msg(struct idpf_adapter *adapter,
> vport_msg->vport_type = cpu_to_le16(VIRTCHNL2_VPORT_TYPE_DEFAULT);
> vport_msg->vport_index = cpu_to_le16(idx);
>
> - if (adapter->req_tx_splitq)
> + if (adapter->req_tx_splitq || !IS_ENABLED(CONFIG_IDPF_SINGLEQ))
> vport_msg->txq_model = cpu_to_le16(VIRTCHNL2_QUEUE_MODEL_SPLIT);
> else
> vport_msg->txq_model = cpu_to_le16(VIRTCHNL2_QUEUE_MODEL_SINGLE);
>
> - if (adapter->req_rx_splitq)
> + if (adapter->req_rx_splitq || !IS_ENABLED(CONFIG_IDPF_SINGLEQ))
> vport_msg->rxq_model = cpu_to_le16(VIRTCHNL2_QUEUE_MODEL_SPLIT);
> else
> vport_msg->rxq_model = cpu_to_le16(VIRTCHNL2_QUEUE_MODEL_SINGLE);
> @@ -1323,10 +1323,17 @@ int idpf_check_supported_desc_ids(struct idpf_vport *vport)
>
> vport_msg = adapter->vport_params_recvd[vport->idx];
>
> + if (!IS_ENABLED(CONFIG_IDPF_SINGLEQ) &&
> + (vport_msg->rxq_model == VIRTCHNL2_QUEUE_MODEL_SINGLE ||
> + vport_msg->txq_model == VIRTCHNL2_QUEUE_MODEL_SINGLE)) {
> + dev_err(&adapter->pdev->dev, "singleq mode requested, but not compiled-in\n");
> + return -EOPNOTSUPP;
> + }
> +
> rx_desc_ids = le64_to_cpu(vport_msg->rx_desc_ids);
> tx_desc_ids = le64_to_cpu(vport_msg->tx_desc_ids);
>
> - if (vport->rxq_model == VIRTCHNL2_QUEUE_MODEL_SPLIT) {
> + if (idpf_is_queue_model_split(vport->rxq_model)) {
> if (!(rx_desc_ids & VIRTCHNL2_RXDID_2_FLEX_SPLITQ_M)) {
> dev_info(&adapter->pdev->dev, "Minimum RX descriptor support not provided, using the default\n");
> vport_msg->rx_desc_ids = cpu_to_le64(VIRTCHNL2_RXDID_2_FLEX_SPLITQ_M);
> @@ -1336,7 +1343,7 @@ int idpf_check_supported_desc_ids(struct idpf_vport *vport)
> vport->base_rxd = true;
> }
>
> - if (vport->txq_model != VIRTCHNL2_QUEUE_MODEL_SPLIT)
> + if (!idpf_is_queue_model_split(vport->txq_model))
> return 0;
>
> if ((tx_desc_ids & MIN_SUPPORT_TXDID) != MIN_SUPPORT_TXDID) {
More information about the Intel-wired-lan
mailing list