[Intel-wired-lan] [PATCH iwl-net V4, 2/2] i40e: Fully suspend and resume IO operations in EEH case
Thinh Tran
thinhtr at linux.ibm.com
Wed May 15 21:07:05 UTC 2024
When EEH events occurs, the callback functions in the i40e, which are
managed by the EEH driver, will completely suspend and resume all IO
operations.
- In the PCI error detected callback, replaced i40e_prep_for_reset()
with i40e_io_suspend(). The change is to fully suspend all I/O
operations
- In the PCI error slot reset callback, replaced pci_enable_device_mem()
with pci_enable_device(). This change enables both I/O and memory of
the device.
- In the PCI error resume callback, replaced i40e_handle_reset_warning()
with i40e_io_resume(). This change allows the system to resume I/O
operations
Fixes: a5f3d2c17b07 ("powerpc/pseries/pci: Add MSI domains")
Reviewed-by: Jacob Keller <jacob.e.keller at intel.com>
Tested-by: Robert Thomas <rob.thomas at ibm.com>
Signed-off-by: Thinh Tran <thinhtr at linux.ibm.com>
---
drivers/net/ethernet/intel/i40e/i40e_main.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 281c8ec27af2..9f71a61e0c52 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -11138,6 +11138,8 @@ static void i40e_reset_and_rebuild(struct i40e_pf *pf, bool reinit,
ret = i40e_reset(pf);
if (!ret)
i40e_rebuild(pf, reinit, lock_acquired);
+ else
+ dev_err(&pf->pdev->dev, "%s: i40e_reset() FAILED", __func__);
}
/**
@@ -16459,7 +16461,7 @@ static pci_ers_result_t i40e_pci_error_detected(struct pci_dev *pdev,
/* shutdown all operations */
if (!test_bit(__I40E_SUSPENDED, pf->state))
- i40e_prep_for_reset(pf);
+ i40e_io_suspend(pf);
/* Request a slot reset */
return PCI_ERS_RESULT_NEED_RESET;
@@ -16481,7 +16483,8 @@ static pci_ers_result_t i40e_pci_error_slot_reset(struct pci_dev *pdev)
u32 reg;
dev_dbg(&pdev->dev, "%s\n", __func__);
- if (pci_enable_device_mem(pdev)) {
+ /* enable I/O and memory of the device */
+ if (pci_enable_device(pdev)) {
dev_info(&pdev->dev,
"Cannot re-enable PCI device after reset.\n");
result = PCI_ERS_RESULT_DISCONNECT;
@@ -16544,7 +16547,7 @@ static void i40e_pci_error_resume(struct pci_dev *pdev)
if (test_bit(__I40E_SUSPENDED, pf->state))
return;
- i40e_handle_reset_warning(pf, false);
+ i40e_io_resume(pf);
}
/**
--
2.25.1
More information about the Intel-wired-lan
mailing list