[Intel-wired-lan] [PATCH iwl-next v7 2/7] ixgbe: Add support for E610 device capabilities detection
Kwapulinski, Piotr
piotr.kwapulinski at intel.com
Mon Jun 3 12:58:36 UTC 2024
>-----Original Message-----
>From: Simon Horman <horms at kernel.org>
>Sent: Friday, May 31, 2024 4:50 PM
>To: Kwapulinski, Piotr <piotr.kwapulinski at intel.com>
>Cc: intel-wired-lan at lists.osuosl.org; netdev at vger.kernel.org; Keller, Jacob E <jacob.e.keller at intel.com>; Wegrzyn, Stefan <stefan.wegrzyn at intel.com>; Jagielski, Jedrzej <jedrzej.jagielski at intel.com>; Sokolowski, Jan <jan.sokolowski at intel.com>
>Subject: Re: [PATCH iwl-next v7 2/7] ixgbe: Add support for E610 device capabilities detection
>
>On Mon, May 27, 2024 at 05:10:18PM +0200, Piotr Kwapulinski wrote:
>> Add low level support for E610 device capabilities detection. The
>> capabilities are discovered via the Admin Command Interface. Discover
>> the following capabilities:
>> - function caps: vmdq, dcb, rss, rx/tx qs, msix, nvm, orom, reset
>> - device caps: vsi, fdir, 1588
>> - phy caps
>>
>> Co-developed-by: Stefan Wegrzyn <stefan.wegrzyn at intel.com>
>> Signed-off-by: Stefan Wegrzyn <stefan.wegrzyn at intel.com>
>> Co-developed-by: Jedrzej Jagielski <jedrzej.jagielski at intel.com>
>> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski at intel.com>
>> Reviewed-by: Jan Sokolowski <jan.sokolowski at intel.com>
>> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski at intel.com>
>> ---
>> drivers/net/ethernet/intel/ixgbe/ixgbe_e610.c | 517
>> ++++++++++++++++++ drivers/net/ethernet/intel/ixgbe/ixgbe_e610.h |
>> 11 +
>> 2 files changed, 528 insertions(+)
>>
>> diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_e610.c
>> b/drivers/net/ethernet/intel/ixgbe/ixgbe_e610.c
>
>...
>
>> +/**
>> + * ixgbe_discover_dev_caps - Read and extract device capabilities
>> + * @hw: pointer to the hardware structure
>> + * @dev_caps: pointer to device capabilities structure
>> + *
>> + * Read the device capabilities and extract them into the dev_caps
>> +structure
>> + * for later use.
>> + *
>> + * Return: the exit code of the operation.
>> + */
>> +int ixgbe_discover_dev_caps(struct ixgbe_hw *hw,
>> + struct ixgbe_hw_dev_caps *dev_caps) {
>> + u8 *cbuf __free(kfree);
>> + u32 cap_count;
>> + int err;
>> +
>> + cbuf = kzalloc(IXGBE_ACI_MAX_BUFFER_SIZE, GFP_KERNEL);
>> + if (!cbuf)
>> + return -ENOMEM;
>> + /* Although the driver doesn't know the number of capabilities the
>> + * device will return, we can simply send a 4KB buffer, the maximum
>> + * possible size that firmware can return.
>> + */
>> + cap_count = IXGBE_ACI_MAX_BUFFER_SIZE /
>> + sizeof(struct ixgbe_aci_cmd_list_caps_elem);
>> +
>> + err = ixgbe_aci_list_caps(hw, cbuf, IXGBE_ACI_MAX_BUFFER_SIZE,
>> + &cap_count,
>> + ixgbe_aci_opc_list_dev_caps);
>> + if (!err)
>> + ixgbe_parse_dev_caps(hw, dev_caps, cbuf, cap_count);
>> +
>> + return err;
>
>Hi Piotr, all,
>
>A minor nit from my side.
>
>It would be more idiomatic to write this such that the main flow of execution is the non-error path, while errors are handled by conditions. In this case, something like this (completely untested!):
>
> err = ixgbe_aci_list_caps(hw, cbuf, IXGBE_ACI_MAX_BUFFER_SIZE,
> &cap_count,
> ixgbe_aci_opc_list_dev_caps);
> if (err)
> return err;
>
> ixgbe_parse_dev_caps(hw, dev_caps, cbuf, cap_count);
>
> return 0;
>
>Likewise in ixgbe_discover_func_caps()
Hello Simon
Will do
Thank you for feedback
>
>> +}
>> +
>> +/**
>> + * ixgbe_discover_func_caps - Read and extract function capabilities
>> + * @hw: pointer to the hardware structure
>> + * @func_caps: pointer to function capabilities structure
>> + *
>> + * Read the function capabilities and extract them into the func_caps
>> +structure
>> + * for later use.
>> + *
>> + * Return: the exit code of the operation.
>> + */
>> +int ixgbe_discover_func_caps(struct ixgbe_hw *hw,
>> + struct ixgbe_hw_func_caps *func_caps) {
>> + u8 *cbuf __free(kfree);
>> + u32 cap_count;
>> + int err;
>> +
>> + cbuf = kzalloc(IXGBE_ACI_MAX_BUFFER_SIZE, GFP_KERNEL);
>> + if (!cbuf)
>> + return -ENOMEM;
>> +
>> + /* Although the driver doesn't know the number of capabilities the
>> + * device will return, we can simply send a 4KB buffer, the maximum
>> + * possible size that firmware can return.
>> + */
>> + cap_count = IXGBE_ACI_MAX_BUFFER_SIZE /
>> + sizeof(struct ixgbe_aci_cmd_list_caps_elem);
>> +
>> + err = ixgbe_aci_list_caps(hw, cbuf, IXGBE_ACI_MAX_BUFFER_SIZE,
>> + &cap_count,
>> + ixgbe_aci_opc_list_func_caps);
>> + if (!err)
>> + ixgbe_parse_func_caps(hw, func_caps, cbuf, cap_count);
>> +
>> + return err;
>> +}
>
More information about the Intel-wired-lan
mailing list