[Intel-wired-lan] [iwl-next v7 2/9] ice: devlink PF MSI-X max and min parameter

[Pucha, HimasekharX Reddy]

> -----Original Message-----
> From: Intel-wired-lan <intel-wired-lan-bounces at osuosl.org> On Behalf Of Michal Swiatkowski
> Sent: 04 November 2024 17:44
> To: intel-wired-lan at lists.osuosl.org
> Cc: pmenzel at molgen.mpg.de; Drewek, Wojciech <wojciech.drewek at intel.com>; Szycik, Marcin <marcin.szycik at intel.com>; netdev at vger.kernel.org; Knitter, Konrad <konrad.knitter at intel.com>; Chmielewski, Pawel <pawel.chmielewski at intel.com>; horms at kernel.org; David.Laight at ACULAB.COM; NEX SW NCIS NAT HPM DEV <nex.sw.ncis.nat.hpm.dev at intel.com>; pio.raczynski at gmail.com; Samudrala, Sridhar <sridhar.samudrala at intel.com>; Keller, Jacob E <jacob.e.keller at intel.com>; jiri at resnulli.us; Kitszel, Przemyslaw <przemyslaw.kitszel at intel.com>
> Subject: [Intel-wired-lan] [iwl-next v7 2/9] ice: devlink PF MSI-X max and min parameter
>
> Use generic devlink PF MSI-X parameter to allow user to change MSI-X range.
>
> Add notes about this parameters into ice devlink documentation.
>
> Signed-off-by: Michal Swiatkowski <michal.swiatkowski at linux.intel.com>
> ---
>  Documentation/networking/devlink/ice.rst      | 11 +++
>  .../net/ethernet/intel/ice/devlink/devlink.c  | 83 ++++++++++++++++++-
>  drivers/net/ethernet/intel/ice/ice.h          |  7 ++
>  drivers/net/ethernet/intel/ice/ice_irq.c      |  7 ++
>  4 files changed, 107 insertions(+), 1 deletion(-)
>

Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha at intel.com> (A Contingent worker at Intel)