[Intel-wired-lan] [PATCH v2 1/1] ixgbe: Correct BASE-BX10 compliance code

[Tore Amundsen]

SFF-8472 (section 5.4 Transceiver Compliance Codes) defines bit 6 as
BASE-BX10. Bit 6 means a value of 0x40 (decimal 64).

The current value in the source code is 0x64, which appears to be a
mix-up of hex and decimal values. A value of 0x64 (binary 01100100)
incorrectly sets bit 2 (1000BASE-CX) and bit 5 (100BASE-FX) as well.

Fixes: 1b43e0d20f2d (ixgbe: Add 1000BASE-BX support)

Signed-off-by: Tore Amundsen <tore at amundsen.org>
Reviewed-by: Paul Menzel <pmenzel at molgen.mpg.de>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
index 14aa2ca51f70..81179c60af4e 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
@@ -40,7 +40,7 @@
 #define IXGBE_SFF_1GBASESX_CAPABLE		0x1
 #define IXGBE_SFF_1GBASELX_CAPABLE		0x2
 #define IXGBE_SFF_1GBASET_CAPABLE		0x8
-#define IXGBE_SFF_BASEBX10_CAPABLE		0x64
+#define IXGBE_SFF_BASEBX10_CAPABLE		0x40
 #define IXGBE_SFF_10GBASESR_CAPABLE		0x10
 #define IXGBE_SFF_10GBASELR_CAPABLE		0x20
 #define IXGBE_SFF_SOFT_RS_SELECT_MASK		0x8
-- 
2.43.0