[Intel-wired-lan] [PATCH iwl-next v2 3/3] ice: enable timesync operation on 2xNAC E825 devices

[Simon Horman]

On Mon, Mar 10, 2025 at 01:24:39PM +0100, Grzegorz Nitka wrote:
> From: Karol Kolacinski <karol.kolacinski at intel.com>
> 
> According to the E825C specification, SBQ address for ports on a single
> complex is device 2 for PHY 0 and device 13 for PHY1.
> For accessing ports on a dual complex E825C (so called 2xNAC mode),
> the driver should use destination device 2 (referred as phy_0) for
> the current complex PHY and device 13 (referred as phy_0_peer) for
> peer complex PHY.
> 
> Differentiate SBQ destination device by checking if current PF port
> number is on the same PHY as target port number.
> 
> Adjust 'ice_get_lane_number' function to provide unique port number for
> ports from PHY1 in 'dual' mode config (by adding fixed offset for PHY1
> ports). Cache this value in ice_hw struct.
> 
> Introduce ice_get_primary_hw wrapper to get access to timesync register
> not available from second NAC.
> 
> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel at intel.com>
> Signed-off-by: Karol Kolacinski <karol.kolacinski at intel.com>
> Co-developed-by: Grzegorz Nitka <grzegorz.nitka at intel.com>
> Signed-off-by: Grzegorz Nitka <grzegorz.nitka at intel.com>

Reviewed-by: Simon Horman <horms at kernel.org>