[Intel-wired-lan] [PATCH bpf v2 8/9] net: enetc: use truesize as XDP RxQ info frag_size

[Larysa Zaremba]

The only user of frag_size field in XDP RxQ info is
bpf_xdp_frags_increase_tail(). It clearly expects truesize instead of DMA
write size. Different assumptions in enetc driver configuration lead to
negative tailroom.

Set frag_size to the same value as frame_sz.

Fixes: 2768b2e2f7d2 ("net: enetc: register XDP RX queues with frag_size")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov at intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba at intel.com>
---
 drivers/net/ethernet/freescale/enetc/enetc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c b/drivers/net/ethernet/freescale/enetc/enetc.c
index e380a4f39855..9fdd448e602f 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc.c
@@ -3468,7 +3468,7 @@ static int enetc_int_vector_init(struct enetc_ndev_priv *priv, int i,
 	priv->rx_ring[i] = bdr;
 
 	err = __xdp_rxq_info_reg(&bdr->xdp.rxq, priv->ndev, i, 0,
-				 ENETC_RXB_DMA_SIZE_XDP);
+				 ENETC_RXB_TRUESIZE);
 	if (err)
 		goto free_vector;
 
-- 
2.52.0