[Intel-wired-lan] [PATCH net] drivers: net: ice: fix devlink parameters get without irdma

[Przemek Kitszel]

On 2/13/26 09:48, Nikolay Aleksandrov wrote:
> If CONFIG_IRDMA isn't enabled but there are ice NICs in the system, the
> driver will prevent full devlink dev param show dump because its rdma get
> callbacks return ENODEV and stop the dump. For example:
>   $ devlink dev param show
>   pci/0000:82:00.0:
>     name msix_vec_per_pf_max type generic
>       values:
>         cmode driverinit value 2
>     name msix_vec_per_pf_min type generic
>       values:
>         cmode driverinit value 2
>   kernel answers: No such device

this issue reproduces even with CONFIG_IRDMA enabled,
but just when there is no irdma in use, so the fix helps
a lot

Reviewed-by: Przemek Kitszel <przemyslaw.kitszel at intel.com>
Tested-by: Przemek Kitszel <przemyslaw.kitszel at intel.com>

> 
> Returning EOPNOTSUPP allows the dump to continue so we can see all devices'
> devlink parameters.
> 
> Fixes: c24a65b6a27c ("iidc/ice/irdma: Update IDC to support multiple consumers")
> Signed-off-by: Nikolay Aleksandrov <nikolay at nvidia.com>
> ---
>   drivers/net/ethernet/intel/ice/devlink/devlink.c | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/ethernet/intel/ice/devlink/devlink.c b/drivers/net/ethernet/intel/ice/devlink/devlink.c
> index 2ef39cc70c21..7de749d3f047 100644
> --- a/drivers/net/ethernet/intel/ice/devlink/devlink.c
> +++ b/drivers/net/ethernet/intel/ice/devlink/devlink.c
> @@ -1360,7 +1360,7 @@ ice_devlink_enable_roce_get(struct devlink *devlink, u32 id,
>   
>   	cdev = pf->cdev_info;
>   	if (!cdev)
> -		return -ENODEV;
> +		return -EOPNOTSUPP;
>   
>   	ctx->val.vbool = !!(cdev->rdma_protocol & IIDC_RDMA_PROTOCOL_ROCEV2);
>   
> @@ -1427,7 +1427,7 @@ ice_devlink_enable_iw_get(struct devlink *devlink, u32 id,
>   
>   	cdev = pf->cdev_info;
>   	if (!cdev)
> -		return -ENODEV;
> +		return -EOPNOTSUPP;
>   
>   	ctx->val.vbool = !!(cdev->rdma_protocol & IIDC_RDMA_PROTOCOL_IWARP);
>