[Replicant] Request for test on the Galaxy SIII (i9300), Was: [PATCH] Remove nonfree binary firmware data.

[Denis 'GNUtoo' Carikli]

On Tue, 9 Apr 2019 23:25:25 +0200
Fil <fil.bergamo at riseup.net> wrote:

> > I didn't address the cypressbln driver yet that is used for instance
> > on the Galaxy Note (n7000).
> 
> It's also relevant for I9100, if I recall correctly..
Yes, I didn't look at it in details yet. I've an I9100 so I can test
once the work is done.

> > It would be great if someone could test it on a Galaxy SIII
> > (i9300). I use mine as a daily phone so it's not a good idea to use
> > it for testing.
> 
> I can test it on i9300 and i9100 during the upcoming weekend.
> I presume it's sufficient to test for the touch keys to work.. Is
> there anything else I should particularly focus on?
Yes, it would also be nice to look the device reboots. This can be done
by looking writing down the time at which it boot, and later by
looking at the output of the uptime command.

I have an i9305 that I use for testing that uses the exact same
touchkey driver, but it rebooted about 3 or 4 minutes after finishing
booting and not touching it.

To get a reliable reboot (it works every time) I boot the device and
remove the USB cable, and leave the device on my table without touching
at it. This is with the stock setting.

Since it also seemed to reboot with Replicant 6.0 0003 releases, and
that I didn't manage to get logs of the reboot in a decent amount of
time, and that the device status is "uncompleted", I didn't look into
the issue further.

Denis.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 833 bytes
Desc: OpenPGP digital signature
URL: <http://lists.osuosl.org/pipermail/replicant/attachments/20190410/90b1d16d/attachment.asc>