[Replicant] Request for test on the Galaxy SIII (i9300), Was: [PATCH] Remove nonfree binary firmware data.

[Fil]

Hi Denis,

I confirm that the patched image you built works on the i9300, touch keys work both in the recovery and in the main system.

I haven't experienced reboot issues, but I'm not sure I understood the testing method. I can repeat the test if you provide me precise instructions..

Thank you for working on this troublesome issue!

Fil




Il 11 aprile 2019 17:06:10 CEST, Denis 'GNUtoo' Carikli <GNUtoo at cyberdimension.org> ha scritto:
>On Tue, 9 Apr 2019 23:25:25 +0200
>Fil <fil.bergamo at riseup.net> wrote:
>
>> It's also relevant for I9100, if I recall correctly..
>I've tested the i9100 and everything looks fine.
>
>Galaxy S 2 (I9100):
>-------------------
>Kernel configuration:
>> # CONFIG_KEYBOARD_CYPRESS_TOUCH is not set
>> CONFIG_KEYBOARD_CYPRESS_TOUCH_BLN=y
>> CONFIG_TOUCHKEY_BLN=y
>
>Test results:
>- The touchkey work fine and illuminate when
>  needed both in the recovery and in the
>  regular distribution.
>- No reboot are seen after more than one leaving
>  the device unattended and unplugged.
>
>Galaxy S 3 4G (I9305):
>----------------------
>Kernel configuration:
>> CONFIG_KEYBOARD_CYPRESS_TOUCH=y
>> # CONFIG_KEYBOARD_CYPRESS_TOUCH_BLN is not set
>
>Test results:
>- Reboots with the stock Replicant 6.0 0003 as well
>  as the images I built for testing the touchkey.
>  I don't know if it's related to my device somehow 
>  or the images.
>
>Do other people have the same behavior with the stock Replicant 0003
>images?
>
>The Galaxy S 3 (I9300), Galaxy Note (N7000) and Galaxy Note 2 (N7100)
>uses the following kernel configuration, so they need to be tested as
>well:
>> CONFIG_KEYBOARD_CYPRESS_TOUCH=y
>> # CONFIG_KEYBOARD_CYPRESS_TOUCH_BLN is not set
>
>The Galaxy Note 8.0 (N5100) and the Galaxy Note 8.0 (N5110) also use
>the
>same kernel but they have the following kernel configuration:
>> # CONFIG_KEYBOARD_CYPRESS_TOUCH is not set
>> # CONFIG_KEYBOARD_CYPRESS_TOUCH_BLN is not set
>so they should not be affected by that set of changes.
>
>As for the other devices supported use a different
>without that touchkey driver.
>
>Denis.

-- 
Sent from my libre Replicant phone.
www.replicant.us
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osuosl.org/pipermail/replicant/attachments/20190419/4ffeaf79/attachment.html>