[Replicant] [libsamsung-ipc][PATCH 53/53] modems: xmm626: switch remaining files to Linux code style
Denis 'GNUtoo' Carikli
GNUtoo at cyberdimension.org
Thu Jun 11 10:57:55 UTC 2020
This contains no functional changes.
"unsigned" was changed to "unsigned int" because
checkpatch.pl was printing the following warning:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
According to the C18 standard[1], "unsigned" is the same as
"unsigned int": in the "6.7 Declarations" section we have:
"- unsigned, or unsigned int" [...]
Each of the comma-separated multisets designates the same type [...]
References:
-----------
[1]The standard doesn't seem to be available for free, but the draft
can be downloaded from the following URL:
https://web.archive.org/web/20181230041359if_/http://www.open-std.org/jtc1/sc22/wg14/www/abq/c17_updated_proposed_fdis.pdf
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo at cyberdimension.org>
---
samsung-ipc/modems/xmm626/xmm626.c | 20 ++--
samsung-ipc/modems/xmm626/xmm626.h | 56 +++++-----
samsung-ipc/modems/xmm626/xmm626_modem_if.h | 6 +-
samsung-ipc/modems/xmm626/xmm626_modem_prj.h | 103 ++++++++++---------
4 files changed, 91 insertions(+), 94 deletions(-)
diff --git a/samsung-ipc/modems/xmm626/xmm626.c b/samsung-ipc/modems/xmm626/xmm626.c
index 0c6846d..dd25d4a 100644
--- a/samsung-ipc/modems/xmm626/xmm626.c
+++ b/samsung-ipc/modems/xmm626/xmm626.c
@@ -25,19 +25,17 @@
unsigned char xmm626_crc_calculate(const void *data, size_t size)
{
- unsigned char crc;
- unsigned char *p;
+ unsigned char crc;
+ unsigned char *p;
- if (data == NULL || size == 0)
- return 0;
+ if (data == NULL || size == 0)
+ return 0;
- p = (unsigned char *) data;
+ p = (unsigned char *) data;
- crc = 0;
- while (size--)
- crc ^= *p++;
+ crc = 0;
+ while (size--)
+ crc ^= *p++;
- return crc;
+ return crc;
}
-
-// vim:ts=4:sw=4:expandtab
diff --git a/samsung-ipc/modems/xmm626/xmm626.h b/samsung-ipc/modems/xmm626/xmm626.h
index 866b36c..d174bc7 100644
--- a/samsung-ipc/modems/xmm626/xmm626.h
+++ b/samsung-ipc/modems/xmm626/xmm626.h
@@ -20,35 +20,33 @@
#ifndef __XMM626_H__
#define __XMM626_H__
-#define XMM626_AT "ATAT"
-#define XMM626_PSI_PADDING 0xFF
-#define XMM626_PSI_MAGIC 0x30
-#define XMM626_SEC_END_MAGIC 0x0000
-#define XMM626_HW_RESET_MAGIC 0x111001
-#define XMM626_DATA_SIZE 0x1000
-#define XMM626_DATA_SIZE_LIMIT 0x80000
-
-#define XMM626_COMMAND_SET_PORT_CONFIG 0x86
-#define XMM626_COMMAND_SEC_START 0x204
-#define XMM626_COMMAND_SEC_END 0x205
-#define XMM626_COMMAND_HW_RESET 0x208
-#define XMM626_COMMAND_FLASH_SET_ADDRESS 0x802
-#define XMM626_COMMAND_FLASH_WRITE_BLOCK 0x804
-
-#define XMM626_FIRMWARE_ADDRESS 0x60300000
-#define XMM626_NV_DATA_ADDRESS 0x60E80000
-#define XMM626_MPS_DATA_ADDRESS 0x61080000
-
-#define XMM626_NV_DATA_PATH "/efs/nv_data.bin"
-#define XMM626_NV_DATA_MD5_PATH "/efs/nv_data.bin.md5"
-#define XMM626_NV_DATA_BACKUP_PATH "/efs/.nv_data.bak"
-#define XMM626_NV_DATA_BACKUP_MD5_PATH "/efs/.nv_data.bak.md5"
-#define XMM626_NV_DATA_SECRET "Samsung_Android_RIL"
-#define XMM626_NV_DATA_SIZE 0x200000
-#define XMM626_NV_DATA_CHUNK_SIZE 0x1000
+#define XMM626_AT "ATAT"
+#define XMM626_PSI_PADDING 0xFF
+#define XMM626_PSI_MAGIC 0x30
+#define XMM626_SEC_END_MAGIC 0x0000
+#define XMM626_HW_RESET_MAGIC 0x111001
+#define XMM626_DATA_SIZE 0x1000
+#define XMM626_DATA_SIZE_LIMIT 0x80000
+
+#define XMM626_COMMAND_SET_PORT_CONFIG 0x86
+#define XMM626_COMMAND_SEC_START 0x204
+#define XMM626_COMMAND_SEC_END 0x205
+#define XMM626_COMMAND_HW_RESET 0x208
+#define XMM626_COMMAND_FLASH_SET_ADDRESS 0x802
+#define XMM626_COMMAND_FLASH_WRITE_BLOCK 0x804
+
+#define XMM626_FIRMWARE_ADDRESS 0x60300000
+#define XMM626_NV_DATA_ADDRESS 0x60E80000
+#define XMM626_MPS_DATA_ADDRESS 0x61080000
+
+#define XMM626_NV_DATA_PATH "/efs/nv_data.bin"
+#define XMM626_NV_DATA_MD5_PATH "/efs/nv_data.bin.md5"
+#define XMM626_NV_DATA_BACKUP_PATH "/efs/.nv_data.bak"
+#define XMM626_NV_DATA_BACKUP_MD5_PATH "/efs/.nv_data.bak.md5"
+#define XMM626_NV_DATA_SECRET "Samsung_Android_RIL"
+#define XMM626_NV_DATA_SIZE 0x200000
+#define XMM626_NV_DATA_CHUNK_SIZE 0x1000
unsigned char xmm626_crc_calculate(const void *data, size_t size);
-#endif
-
-// vim:ts=4:sw=4:expandtab
+#endif /* __XMM626_H__ */
diff --git a/samsung-ipc/modems/xmm626/xmm626_modem_if.h b/samsung-ipc/modems/xmm626/xmm626_modem_if.h
index 150bd8a..3cbc687 100644
--- a/samsung-ipc/modems/xmm626/xmm626_modem_if.h
+++ b/samsung-ipc/modems/xmm626/xmm626_modem_if.h
@@ -36,7 +36,7 @@ enum dev_format {
IPC_RAMDUMP,
MAX_DEV_FORMAT,
};
-#define MAX_IPC_DEV (IPC_RFS + 1)
+#define MAX_IPC_DEV (IPC_RFS + 1)
enum modem_io {
IODEV_MISC,
@@ -54,7 +54,7 @@ enum modem_link {
LINKDEV_C2C,
LINKDEV_MAX,
};
-#define LINKTYPE(modem_link) (1u << (modem_link))
+#define LINKTYPE(modem_link) (1u << (modem_link))
enum modem_network {
UMTS_NETWORK,
@@ -71,4 +71,4 @@ enum sipc_ver {
MAX_SIPC_VER,
};
-#endif
+#endif /* __MODEM_IF_H__ */
diff --git a/samsung-ipc/modems/xmm626/xmm626_modem_prj.h b/samsung-ipc/modems/xmm626/xmm626_modem_prj.h
index 99f6087..97cdeb6 100644
--- a/samsung-ipc/modems/xmm626/xmm626_modem_prj.h
+++ b/samsung-ipc/modems/xmm626/xmm626_modem_prj.h
@@ -27,15 +27,16 @@
#define MAX_CPINFO_SIZE 512
-#define MAX_LINK_DEVTYPE 3
+#define MAX_LINK_DEVTYPE 3
-#define MAX_FMT_DEVS 10
-#define MAX_RAW_DEVS 32
-#define MAX_RFS_DEVS 10
-#define MAX_NUM_IO_DEV (MAX_FMT_DEVS + MAX_RAW_DEVS + MAX_RFS_DEVS)
+#define MAX_FMT_DEVS 10
+#define MAX_RAW_DEVS 32
+#define MAX_RFS_DEVS 10
+#define MAX_NUM_IO_DEV (MAX_FMT_DEVS + MAX_RAW_DEVS + \
+ MAX_RFS_DEVS)
#define IOCTL_MODEM_ON _IO('o', 0x19)
-#define IOCTL_MODEM_OFF _IO('o', 0x20)
+#define IOCTL_MODEM_OFF _IO('o', 0x20)
#define IOCTL_MODEM_RESET _IO('o', 0x21)
#define IOCTL_MODEM_BOOT_ON _IO('o', 0x22)
#define IOCTL_MODEM_BOOT_OFF _IO('o', 0x23)
@@ -48,56 +49,56 @@
#define IOCTL_MODEM_DL_START _IO('o', 0x28)
#define IOCTL_MODEM_FW_UPDATE _IO('o', 0x29)
-#define IOCTL_MODEM_NET_SUSPEND _IO('o', 0x30)
+#define IOCTL_MODEM_NET_SUSPEND _IO('o', 0x30)
#define IOCTL_MODEM_NET_RESUME _IO('o', 0x31)
#define IOCTL_MODEM_DUMP_START _IO('o', 0x32)
-#define IOCTL_MODEM_DUMP_UPDATE _IO('o', 0x33)
+#define IOCTL_MODEM_DUMP_UPDATE _IO('o', 0x33)
#define IOCTL_MODEM_FORCE_CRASH_EXIT _IO('o', 0x34)
#define IOCTL_MODEM_CP_UPLOAD _IO('o', 0x35)
#define IOCTL_MODEM_DUMP_RESET _IO('o', 0x36)
#define IOCTL_DPRAM_SEND_BOOT _IO('o', 0x40)
-#define IOCTL_DPRAM_INIT_STATUS _IO('o', 0x43)
+#define IOCTL_DPRAM_INIT_STATUS _IO('o', 0x43)
/* ioctl command definitions. */
-#define IOCTL_DPRAM_PHONE_POWON _IO('o', 0xd0)
+#define IOCTL_DPRAM_PHONE_POWON _IO('o', 0xd0)
#define IOCTL_DPRAM_PHONEIMG_LOAD _IO('o', 0xd1)
-#define IOCTL_DPRAM_NVDATA_LOAD _IO('o', 0xd2)
+#define IOCTL_DPRAM_NVDATA_LOAD _IO('o', 0xd2)
#define IOCTL_DPRAM_PHONE_BOOTSTART _IO('o', 0xd3)
#define IOCTL_DPRAM_PHONE_UPLOAD_STEP1 _IO('o', 0xde)
#define IOCTL_DPRAM_PHONE_UPLOAD_STEP2 _IO('o', 0xdf)
/* modem status */
-#define MODEM_OFF 0
-#define MODEM_CRASHED 1
-#define MODEM_RAMDUMP 2
-#define MODEM_POWER_ON 3
-#define MODEM_BOOTING_NORMAL 4
-#define MODEM_BOOTING_RAMDUMP 5
-#define MODEM_DUMPING 6
-#define MODEM_RUNNING 7
+#define MODEM_OFF 0
+#define MODEM_CRASHED 1
+#define MODEM_RAMDUMP 2
+#define MODEM_POWER_ON 3
+#define MODEM_BOOTING_NORMAL 4
+#define MODEM_BOOTING_RAMDUMP 5
+#define MODEM_DUMPING 6
+#define MODEM_RUNNING 7
-#define HDLC_HEADER_MAX_SIZE 6 /* fmt 3, raw 6, rfs 6 */
+#define HDLC_HEADER_MAX_SIZE 6 /* fmt 3, raw 6, rfs 6 */
-#define PSD_DATA_CHID_BEGIN 0x2A
-#define PSD_DATA_CHID_END 0x38
+#define PSD_DATA_CHID_BEGIN 0x2A
+#define PSD_DATA_CHID_END 0x38
-#define PS_DATA_CH_0 10
-#define PS_DATA_CH_LAST 24
+#define PS_DATA_CH_0 10
+#define PS_DATA_CH_LAST 24
-#define IP6VERSION 6
+#define IP6VERSION 6
#define SOURCE_MAC_ADDR {0x12, 0x34, 0x56, 0x78, 0x9A, 0xBC}
/* Debugging features */
-#define MAX_MIF_LOG_PATH_LEN 128
-#define MAX_MIF_LOG_FILE_SIZE 0x800000 /* 8 MB */
+#define MAX_MIF_LOG_PATH_LEN 128
+#define MAX_MIF_LOG_FILE_SIZE 0x800000 /* 8 MB */
-#define MAX_MIF_EVT_BUFF_SIZE 256
-#define MAX_MIF_TIME_LEN 32
-#define MAX_MIF_NAME_LEN 16
+#define MAX_MIF_EVT_BUFF_SIZE 256
+#define MAX_MIF_TIME_LEN 32
+#define MAX_MIF_NAME_LEN 16
#define MAX_MIF_STR_LEN 127
#define MAX_MIF_LOG_LEN 128
@@ -113,8 +114,8 @@ enum mif_event_id {
};
struct dpram_queue_status {
- unsigned in;
- unsigned out;
+ unsigned int in;
+ unsigned int out;
};
struct dpram_queue_status_pair {
@@ -123,11 +124,11 @@ struct dpram_queue_status_pair {
};
struct dpram_irq_buff {
- unsigned magic;
- unsigned access;
+ unsigned int magic;
+ unsigned int access;
struct dpram_queue_status_pair qsp[MAX_IPC_DEV];
- unsigned int2ap;
- unsigned int2cp;
+ unsigned int int2ap;
+ unsigned int int2cp;
};
struct mif_event_buff {
@@ -143,16 +144,16 @@ struct mif_event_buff {
char ld[MAX_MIF_NAME_LEN];
enum modem_link link_type;
- unsigned rcvd;
- unsigned len;
+ unsigned int rcvd;
+ unsigned int len;
union {
u8 data[MAX_MIF_LOG_LEN];
struct dpram_irq_buff dpram_irqb;
};
};
-#define MIF_LOG_DIR "/sdcard"
-#define MIF_LOG_LV_FILE "/data/.mif_log_level"
+#define MIF_LOG_DIR "/sdcard"
+#define MIF_LOG_LV_FILE "/data/.mif_log_level"
/* Does modem ctl structure will use state ? or status defined below ?*/
enum modem_state {
@@ -184,21 +185,21 @@ enum link_mode {
};
struct sim_state {
- bool online; /* SIM is online? */
- bool changed; /* online is changed? */
+ bool online; /* SIM is online? */
+ bool changed; /* online is changed? */
};
-#define HDLC_START 0x7F
-#define HDLC_END 0x7E
-#define SIZE_OF_HDLC_START 1
-#define SIZE_OF_HDLC_END 1
-#define MAX_LINK_PADDING_SIZE 3
+#define HDLC_START 0x7F
+#define HDLC_END 0x7E
+#define SIZE_OF_HDLC_START 1
+#define SIZE_OF_HDLC_END 1
+#define MAX_LINK_PADDING_SIZE 3
struct header_data {
char hdr[HDLC_HEADER_MAX_SIZE];
- unsigned len;
- unsigned frag_len;
- char start; /*hdlc start header 0x7F*/
+ unsigned int len;
+ unsigned int frag_len;
+ char start; /*hdlc start header 0x7F*/
};
struct fmt_hdr {
@@ -227,4 +228,4 @@ struct sipc_fmt_hdr {
u8 cmd_type;
} __attribute__((packed));
-#endif
+#endif /* __MODEM_PRJ_H__ */
--
2.27.0
More information about the Replicant
mailing list