[Replicant] [PATCH 5/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4412

Marek Szyprowski m.szyprowski at samsung.com
Fri Mar 24 17:07:26 UTC 2023


On 06.02.2023 17:12, Krzysztof Kozlowski wrote:
> On 03/02/2023 23:50, Marek Szyprowski wrote:
>> On 03.02.2023 22:12, Krzysztof Kozlowski wrote:
>>> On 03/02/2023 21:34, Krzysztof Kozlowski wrote:
>>>> On 03/02/2023 12:51, Marek Szyprowski wrote:
>>>>> On 03.02.2023 12:46, Krzysztof Kozlowski wrote:
>>>>>> On 03/02/2023 12:45, Marek Szyprowski wrote:
>>>>>>> On 29.01.2023 11:42, Krzysztof Kozlowski wrote:
>>>>>>>> On 25/01/2023 10:45, Krzysztof Kozlowski wrote:
>>>>>>>>> The soc node is supposed to have only device nodes with MMIO addresses,
>>>>>>>>> as reported by dtc W=1:
>>>>>>>>>
>>>>>>>>>       exynos4412.dtsi:407.20-413.5:
>>>>>>>>>         Warning (simple_bus_reg): /soc/bus-acp: missing or empty reg/ranges property
>>>>>>>>>
>>>>>>>>> and dtbs_check:
>>>>>>>>>
>>>>>>>>>       exynos4412-i9300.dtb: soc: bus-acp:
>>>>>>>>>         {'compatible': ['samsung,exynos-bus'], 'clocks': [[7, 456]], 'clock-names': ['bus'], 'operating-points-v2': [[132]], 'status': ['okay'], 'devfreq': [[117]]} should not be valid under {'type': 'object'}
>>>>>>>>>
>>>>>>>>> Move the bus nodes and their OPP tables out of SoC to fix this.
>>>>>>>>> Re-order them alphabetically while moving and put some of the OPP tables
>>>>>>>>> in device nodes (if they are not shared).
>>>>>>>>>
>>>>>>>> Applied.
>>>>>>> I don't have a good news. It looks that this change is responsible for
>>>>>>> breaking boards that were rock-stable so far, like Odroid U3. I didn't
>>>>>>> manage to analyze what exactly causes the issue, but it looks that the
>>>>>>> exynos-bus devfreq driver somehow depends on the order of the nodes:
>>>>>>>
>>>>>>> (before)
>>>>>>>
>>>>>>> # dmesg | grep exynos-bus
>>>>>>> [    6.415266] exynos-bus: new bus device registered: soc:bus-dmc
>>>>>>> (100000 KHz ~ 400000 KHz)
>>>>>>> [    6.422717] exynos-bus: new bus device registered: soc:bus-acp
>>>>>>> (100000 KHz ~ 267000 KHz)
>>>>>>> [    6.454323] exynos-bus: new bus device registered: soc:bus-c2c
>>>>>>> (100000 KHz ~ 400000 KHz)
>>>>>>> [    6.489944] exynos-bus: new bus device registered: soc:bus-leftbus
>>>>>>> (100000 KHz ~ 200000 KHz)
>>>>>>> [    6.493990] exynos-bus: new bus device registered: soc:bus-rightbus
>>>>>>> (100000 KHz ~ 200000 KHz)
>>>>>>> [    6.494612] exynos-bus: new bus device registered: soc:bus-display
>>>>>>> (160000 KHz ~ 200000 KHz)
>>>>>>> [    6.494932] exynos-bus: new bus device registered: soc:bus-fsys
>>>>>>> (100000 KHz ~ 134000 KHz)
>>>>>>> [    6.495246] exynos-bus: new bus device registered: soc:bus-peri (
>>>>>>> 50000 KHz ~ 100000 KHz)
>>>>>>> [    6.495577] exynos-bus: new bus device registered: soc:bus-mfc
>>>>>>> (100000 KHz ~ 200000 KHz)
>>>>>>>
>>>>>>> (after)
>>>>>>>
>>>>>>> # dmesg | grep exynos-bus
>>>>>>>
>>>>>>> [    6.082032] exynos-bus: new bus device registered: bus-dmc (100000
>>>>>>> KHz ~ 400000 KHz)
>>>>>>> [    6.122726] exynos-bus: new bus device registered: bus-leftbus
>>>>>>> (100000 KHz ~ 200000 KHz)
>>>>>>> [    6.146705] exynos-bus: new bus device registered: bus-mfc (100000
>>>>>>> KHz ~ 200000 KHz)
>>>>>>> [    6.181632] exynos-bus: new bus device registered: bus-peri ( 50000
>>>>>>> KHz ~ 100000 KHz)
>>>>>>> [    6.204770] exynos-bus: new bus device registered: bus-rightbus
>>>>>>> (100000 KHz ~ 200000 KHz)
>>>>>>> [    6.211087] exynos-bus: new bus device registered: bus-acp (100000
>>>>>>> KHz ~ 267000 KHz)
>>>>>>> [    6.216936] exynos-bus: new bus device registered: bus-c2c (100000
>>>>>>> KHz ~ 400000 KHz)
>>>>>>> [    6.225748] exynos-bus: new bus device registered: bus-display
>>>>>>> (160000 KHz ~ 200000 KHz)
>>>>>>> [    6.242978] exynos-bus: new bus device registered: bus-fsys (100000
>>>>>>> KHz ~ 134000 KHz)
>>>>>>>
>>>>>>> This is definitely a driver bug, but so far it worked fine, so this is a
>>>>>>> regression that need to be addressed somehow...
>>>>>> Thanks for checking, but what is exactly the bug? The devices registered
>>>>>> - just with different name.
>>>>> The bug is that the board fails to boot from time to time, freezing
>>>>> after registering PPMU counters...
>>>> My U3 with and without this patch, reports several warnings:
>>>> iommu_group_do_set_platform_dma()
>>>> exynos_iommu_domain_free()
>>>> clk_core_enable()
>>>>
>>>> and finally:
>>>> rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
>>>>
>>>> and keeps stalling.
>>>>
>>>> At least on next-20230203. Except all these (which anyway make board
>>>> unbootable) look fine around PMU and exynos-bus.
>>> I also booted few times my next/dt branch (with this patch) and no
>>> problems. How reproducible is the issue you experience?
>> IOMMU needs a fixup, that has been merged today:
>>
>> https://lore.kernel.org/all/20230123093102.12392-1-m.szyprowski@samsung.com/
>>
>> I was initially convinced that this freeze is somehow related to this
>> IOMMU fixup, but it turned out that the devfreq is a source of the problems.
>>
>> The freeze happens here about 1 of 10 boots, usually with kernel
>> compiled from multi_v7_defconfig, while loading the PPMU modules. It
>> happens on your next/dt branch too.
> I was able to reproduce it easily with multi_v7. Then I commented out
> dmc bus which fixed the issue. Then I commented out acp and c2c buses
> (children/passive) which also fixed the issue. Then I uncommented
> everything and went back to next/dt - exactly the same as it was failing
> - and since then I cannot reproduce it. I triple checked, but now my
> multi_v7 on U3 on next/dt boots perfectly fine. Every time.

This issue still happens from time to time. I quick workaround to fix it 
is to add:

MODULE_SOFTDEP("pre: exynos_ppmu");

to the exynos-bus driver. Is it acceptable solution?


Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland



More information about the Replicant mailing list